 |
S-50-24
YUMO
1
Zhejiang, China
24V
AC DC
2.1A
50W AC DC Power Supply S-50-24
Introduction:
YUMO Switching power supply products are widely used in industrial automation control, industry equipment, scientific research equipment, LED lighting, industrial control equipment, communications equipment, electrical equipment, instrumentation, medical equipment, semiconductor refrigeration and heating, air purifier, electronic refrigerator, LCD, LED lamps and lanterns, communications equipment, audio and video products, security monitoring, LED lights belt, computer case, digital products and instruments, etc.
Features:
AC input range selected by switch
Protections: Short circuit/Over load
Cooling by free air convection
LED indicator for power on
Fixed switching frequency at 27 KHz
1 year warranty
50W AC DC Power Supply S-50-24 Specification
| MODEL | S-50-24 | |
| OUTPUT | Dc voLTAGE | 24v |
| RATED CURRENT | 2.1A | |
| CURRENTRANGE | 0~2.1A | |
| RATED POWER | 50w | |
| RIPPLE &NOISE (max.) Note.2 | 100mVp-p | |
| voLTAGEADJ.RANGE | 22.6~26.4v | |
| voLTAGE TOLERANCE Note.3 | ±1.0% | |
| LNEREGULATION | ±0.5% | |
| LoAD REGULATION | ±0.5% | |
| sETUP,RISE,HOLD TIME | 200ms,100ms,20ms at full load | |
| INPUT | voLTAGERANGE | ss ~132VAc7 170~ 264VAC selected by switch240~370vDc |
| FREQUENCYRANGE | 47~63Hz | |
| EFFICENCY(Typ.) | s2% | |
| Ac CURRENT | 1.3A/115VAC0.65A/230VAc | |
| NRUSH CURRENT (max.) | coLD START 18A/115VAC36A230VAc | |
| LEAKAGE CURRENT | #ERROR! | |
| PROTECTION | oVERLOAD | ios~150% rated output power |
| Protection type:Fold back current limiting, recovers automatically after fault condition is removed. | ||
| ENVIRONMEN T | woRKING TEMP. | -10~+60°C |
| woRKING HUMDrrY | 2o ~90%RH non-condensing | |
| sTORAGE TEMP., HUMDITY | -20~+85°C,10~95%RH | |
| TEMP.COEFFICIENT | 0.03%ºC(o~50°c) | |
| VIBRATION | 1o~ 500Hz,2G10min../1cycle,60min. each alongx,Y,Z axes | |
| SAFETY& EMd | sAFETY STANDARDS | Design refer to UL1012 |
| wrrHSTAND vOLTAGE | iP-o/P:1.5KVACIP-FG:1.5KVACO/P-FG:0.5KVAC | |
| isoLATION RESISTANCE | rP-O/P,1P-FG,O/P-FG:100M Ohms/500VDc | |
| EM CoNDUcTION& RADIATION | Design refer to FCC Pat15JConduction ClassB | |
| OTHERS | MTBF | 408.3K hrs min.MIL-HDBK-217F (25c) |
| DIMENSION | 159*97*38mm(L*W*H) | |
| PACKING | 0.45Kg;30pcs/14.92Kg0.0250CBM | |
| NoTE | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25C of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a l2" twisted pair-wire terminated with a o.luf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. | |
50W AC DC Power Supply S-50-24
Introduction:
YUMO Switching power supply products are widely used in industrial automation control, industry equipment, scientific research equipment, LED lighting, industrial control equipment, communications equipment, electrical equipment, instrumentation, medical equipment, semiconductor refrigeration and heating, air purifier, electronic refrigerator, LCD, LED lamps and lanterns, communications equipment, audio and video products, security monitoring, LED lights belt, computer case, digital products and instruments, etc.
Features:
AC input range selected by switch
Protections: Short circuit/Over load
Cooling by free air convection
LED indicator for power on
Fixed switching frequency at 27 KHz
1 year warranty
50W AC DC Power Supply S-50-24 Specification
| MODEL | S-50-24 | |
| OUTPUT | Dc voLTAGE | 24v |
| RATED CURRENT | 2.1A | |
| CURRENTRANGE | 0~2.1A | |
| RATED POWER | 50w | |
| RIPPLE &NOISE (max.) Note.2 | 100mVp-p | |
| voLTAGEADJ.RANGE | 22.6~26.4v | |
| voLTAGE TOLERANCE Note.3 | ±1.0% | |
| LNEREGULATION | ±0.5% | |
| LoAD REGULATION | ±0.5% | |
| sETUP,RISE,HOLD TIME | 200ms,100ms,20ms at full load | |
| INPUT | voLTAGERANGE | ss ~132VAc7 170~ 264VAC selected by switch240~370vDc |
| FREQUENCYRANGE | 47~63Hz | |
| EFFICENCY(Typ.) | s2% | |
| Ac CURRENT | 1.3A/115VAC0.65A/230VAc | |
| NRUSH CURRENT (max.) | coLD START 18A/115VAC36A230VAc | |
| LEAKAGE CURRENT | #ERROR! | |
| PROTECTION | oVERLOAD | ios~150% rated output power |
| Protection type:Fold back current limiting, recovers automatically after fault condition is removed. | ||
| ENVIRONMEN T | woRKING TEMP. | -10~+60°C |
| woRKING HUMDrrY | 2o ~90%RH non-condensing | |
| sTORAGE TEMP., HUMDITY | -20~+85°C,10~95%RH | |
| TEMP.COEFFICIENT | 0.03%ºC(o~50°c) | |
| VIBRATION | 1o~ 500Hz,2G10min../1cycle,60min. each alongx,Y,Z axes | |
| SAFETY& EMd | sAFETY STANDARDS | Design refer to UL1012 |
| wrrHSTAND vOLTAGE | iP-o/P:1.5KVACIP-FG:1.5KVACO/P-FG:0.5KVAC | |
| isoLATION RESISTANCE | rP-O/P,1P-FG,O/P-FG:100M Ohms/500VDc | |
| EM CoNDUcTION& RADIATION | Design refer to FCC Pat15JConduction ClassB | |
| OTHERS | MTBF | 408.3K hrs min.MIL-HDBK-217F (25c) |
| DIMENSION | 159*97*38mm(L*W*H) | |
| PACKING | 0.45Kg;30pcs/14.92Kg0.0250CBM | |
| NoTE | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25C of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a l2" twisted pair-wire terminated with a o.luf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. | |
