You are here: Home » Programmable Logic Controller (PLC) » FAB Programmable Logic Controller » AF-10MR-E2 Programmable Logic Controller plc controller PLC
Share to:

AF-10MR-E2 Programmable Logic Controller plc controller PLC

DC/AC power supply, with digital input, 6 points AC/DC input, 4 points relay output PLC Programmable Logic Controller
  • AF-10MR-E2
  • YUMO
Availability:

AF-10MR-E2 Programmable Logic Controller plc controller PLC


Introduction:

        FAB2 Intelligent Controller Series is a new programmable controller launched by YUMO, with the programming by FBD (Function Block Diagram) , which is simpler and easier to learn than the conventional PLC (ladder diagram and instruction). In the design concept of YUMO FAB2 series products, traditional separated controller of PLC is combined with the writer on which the program can be written directly by using the function keys on the LCD front panel in order to reduce the cost and bring convenience to users. YUMO FAB2 is very compact and light-weighted, especially suitable for internal installation usage.

        In addition, FAB2 intelligent controller series can perform the local and remote Internet communication and monitoring. And FAB2 can be used with voice module to perform telephone remote control, voice prompting, auto-dialing and other functions. At present, the YUMO FAB2 is widely used in various areas such as industry, agriculture and automatic house control. It can be used almost everywhere.

Features:
1.Password protection
2.Add power indicator
3.Improve analog accuracy
4.Improve RTC accuracy
5.Improve PLC running speed
6.2 channels with 485 interface and 1 channel with the programing interface
7.Support Text Panel (SH300)
8.Support the standard Modbus RTU protocol (only read)

Model NO.: AF-10MR-E2

      This model is a DC power supply, rated voltage can be DC12/24V, 6 points DC digital input, 4 points relay output, without LCD.

  • Exquisite and compact design

  • Multi-functional, easy operating, convenient, easy learning

  • AF-LCD can not use in AF-10MR-E2, it instead by AF-HMI.

Dimensions: (unit:mm)

         Take the 10 points module as an example. The 20 points modules share the same width and height, the only one difference exists in the length.

1564021289(1).jpg

Type Dimensions(mm)
10 points main module 71.6*90.4*51.3
20 points main module 126.4*90.4*51.3

Technical parameters:

Item AF-10MR-A2 AF-10MR-D2 AF-10MR-E2 AF-10MT-D2 AF-10MT-GD2 AF-10MT-E2
AF-20MR-A2 AF-20MR-D2 AF-20MR-E2 AF-20MT-D2 AF-20MT-GD2 AF-20MT-E2
Surge Immunity 2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5)
Electrostatic Discharge (outer casing) ±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5)
Ambient Temperature -10℃~+55℃
Storage Temperature -40℃~+70℃
Ambient Humidity 5%~95%RH
Degree of Protection IP20(Non-waterproof)
Installation Fixing with M3 screws or Standard DIN rail mounting
Dimensions (mm) 71.6*90.4*51.3(10 points);126.4*90.4*51.3(20 points)
Programming Language FBD
Points 10 points/20 points
Memory Capacity 127 FBDs
Real-time Clock 160h
Password Protection yes
Analog Operation At most 12 channels with DC 0-10V voltage
Simulate Monitoring Yes
Communication Interface support 2 channel with RS485 and 1 channel with program interfaces
Baud Rate 9600bps/19200bps
Communication Protocol Self-defined protocol/MODBUS RTU protocol
Power Supply
Rated Voltage AC100-240V DC12-24V AC/DC12-24V DC12-24V DC12-24V DC12-24V
Permissible Range DC85-260V DC10-28V AC/DC10-28V DC10-28V DC10-28V DC10-28V
Power Consumption <10w <7w <7w <2w <2w <2w
Digital Input
Input Type NPN/PNP NPN/PNP NPN/PNP NPN/PNP NPN/PNP NPN/PNP
Input Signal 0 AC0-40V DC0-5V AC/DC0-5V DC0-5V DC0-5V DC0-5V
Input Signal 1 AC80-240V DC10-24V AC/DC10-24V DC10-24V DC10-24V DC10-24V
Isolation Photoelectric isolation / / / / /
Isolated Group 6/12 groups
Isolated Voltage 2500/5000Vr.m.s
Digital Output
Output Type Relay Relay Relay Transistor(NPN) Transistor(PNP) Transistor(NPN)
Isolation Method Relay isolation Relay isolation Relay isolation - - -
Analog Input
Input Type -- (DC0-10V)/6 inputs -- (DC0-10V)/6 inputs (4-20mA)/2 inputs --
(DC0-10V)/12 inputs (DC0-10V)/12 inputs (DC0-10V)/12 inputs

YUMO FAB2 series programmable logic controller

Type Power Input Output
AF-10MR-A2 AC85V-240V 6 points AC digital input 4 points relay output
AF-10MR-D2 DC12V/24V 6 points DC digital input (can be used as analog input) 4 points relay output
AF-10MR-E2 DC12V/24V 6 points DC digital input 4 points relay output
AF-10MT-D2 DC12V/24V 6 points DC digital input(can be used as analog input) 4 points NPN transistor output
AF-10MT-GD2 DC12V/24V 6 points DC digital input(can be used as analog input) 4 points PNP transistor output
AF-10MT-E2 DC12V/24V 6 points DC digital input 4 points transistor
(NPN)output
AF-20MR-A2 AC85V-240V 12 points AC digital input 8 points relay output
AF-20MR-D2 DC12V/24V 12 points DC digital input (can be used as analog input) 8 points relay output
AF-20MR-E2 DC12V/24V 12 points DC digital input (without analog input) 8 points relay output
AF-20MT-D2 DC12V/24V 12 points DC digital input(can be used as analog input) 8 points NPN transistor output
AF-20MT-GD2 DC12V/24V 12 points DC digital input(can be used as analog input) 8 points PNP transistor output
AF-20MT-E2 DC12V/24V 12 points DC digital input 8 points NPN transistor output

Product Pictures

Programmable Logic ControllerProgrammable Logic ControllerProgrammable Logic ControllerProgrammable Logic ControllerProgrammable Logic Controller


Item Code Description
1 AF-10MR-A(with LCD) 85V-240VAC, 6 points AC input 4 points relay output
2 AF-10MR-A(without LCD) 85V-240VAC, 6 points AC input 4 points relay output
3 AF-10MR-D(with LCD) DC12/24V, 6points DC input 4 points (with analog input) relay output
4 AF-10MR-D(without LCD) DC12/24V, 6points DC input 4 points (with analog input) relay output
5 AF-10MR-E(with LCD) DC12/24V, 6 points DC input 4 points relay output
6 AF-10MR-E(without LCD) DC12/24V, 6 points DC input 4 points relay output
7 AF-10MT-D(with LCD) DC12/24V, 6points DC input 4 points transistor output(exuivalent NPN)
8 AF-10MT-D(without LCD) DC12/24V, 6points DC input 4 points transistor output(exuivalent NPN)
9 AF-10MT-GD(with LCD) DC12/24V, 6points DC input 4 points transistor output(exuivalent PNP)
10 AF-10MT-GD(without LCD) DC12/24V, 6points DC input 4 points transistor output(exuivalent PNP)
11 AF-10MT-E(with LCD) DC12/24V,6 points DC input 4 points electronic transistor output
12 AF-10MT-E(without LCD) DC12/24V,6 points DC input 4 points electronic transistor output
13 AF-20MR-A(with LCD) 85V-240VAC ,12 points AC input 8 points relay output
14 AF-20MR-A(without LCD) 85V-240VAC ,12 points AC input 8 points relay output
15 AF-20MR-D(with LCD) DC12/24V,12 points DC input 8 points (with analog input) relay output
16 AF-20MR-D(without LCD) DC12/24V,12 points DC input 8 points (with analog input) relay output
17 AF-20MR-E(with LCD) DC12/24V ,12 points DC input 8 points relay output (without analog input)
18 AF-20MR-E(without LCD) DC12/24V ,12 points DC input 8 points relay output (without analog input)
19 AF-20MT-E(with LCD) DC12/24V,12points DC input 8 points transistor output(exuivalent NPN)
20 AF-20MT-E(without LCD) DC12/24V,12points DC input 8 points transistor output(exuivalent NPN)
21 AF-20MT-D(with LCD) DC12/24V,12points DC input 8 points transistor output(exuivalent NPN)
22 AF-20MT-D(without LCD) DC12/24V,12points DC input 8 points transistor output(exuivalent NPN)
23 AF-20MT-GD(with LCD) DC12/24V,12points DC input 8 points transistor output(exuivalent PNP)
24 AF-20MT-GD(without LCD) DC12/24V,12points DC input 8 points transistor output(exuivalent PNP)
25 AF-C232    Cable for FAB and PC Modem for programming
26 AF-C485     Interface between 485bus and FAB for network monitor
27 AF-CMP   The cable connect to the telephone module port  "TO PC'
28 AF-COPY  Copy module
29 AF-D232  the cable connecting FAB and PC (frontispiece plug type)
30 AF-MUL-D Voice module to realize voice function(DC POWER)
31 AF-DUSB   the interface between FAB and PC USB port (frontispiece plug type)
32 AF-LCD  Removable LCD clip in screen for easy programming
33 AF-M232     Interface between FAB and MODEM for remote control and programming
34 AF-MUL Voice module to realize voice function(AC POWER)
35 AF-P485    Interface between 485bus and PC for network function
36 AF-S485 Interface is the connector between RS232 and RS485 (DIN installation). 
37 AF(SR)-USB     USB/RS232 convertor (DIN installation)
38 SP-05AL Input: 110/220VAC Output: Voltage :5VDC   Current :14A Din rail type
39 SP-05AS Input: 110/220VAC Output: Voltage :5VDC   Current :7A Din rail type
40 SP-12AL Input: 110/220VAC Output: Voltage :12VDC   Current :6A Din rail type
41 SP-12AS Input: 110/220VAC Output: Voltage :12VDC   Current :3A Din rail type
42 SP-24AL Input: 110/220VAC Output: Voltage :24VDC  Current :3A Din rail type
43 SP-24AS Input: 110/220VAC Output: Voltage :24VDC   Current :1.5A Din rail type
44 SR-12MRAC 100-240VAC 8 Points AC input, 4 points relay output
45 SR-12MRDC DC12/24V 8 points DC input (with 6 points analog ) , 4 points relay output
46 SR-12MTDC DC12/24V 8 points DC input (with 6 points analog ) , 4 points transistor output(NPN)
47 SR-12MGDC DC12/24V 8 points DC input (with 6 points analog ) , 4 points transistor output(PNP)
48 SR-20ERA 100-240VAC 12  AC input, 8 points relay output, 20 points extended module
49 SR-20ERD DC12/24V 12 points DC input , 8 points relay output, 20 points extended module
50 SR-20ETD DC12/24V 12 points DC input , 8 points transistor output ,20 points extended module (NPN)
51 SR-20EGD DC12/24V 12 points DC input , 8 points transistor output ,20 points extended module (PNP)
52 SR-22MRAC 100-240VAC 14 Points AC input, 8points relay output
53 SR-22MRDC DC12/24V 14 points DC input (with 8 points analog ) , 8 points relay output
54 SR-22MTDC DC12/24V 14 points DC input (with 8 points analog ) , 8 points transistor output(NPN)
55 SR-22MGDC DC12/24V 14 points DC input (with 8 points analog ) , 8 points transistor output(PNP)
56 SR-AUD The recording microphone and the wires between the sound card and the SR-VPA/SR-VPD
57 SR-CP Programmable cable can edit,analog, monitor from PC to Super Relay
58 SR-EANT Long connecting antenna of SR-RCA and SR-RCD
59 SR-ECBA AC type, to remotely connect the machine and the extended module
60 SR-ECBD DC type, to remotely connect the machine and the extended module
61 SR-EHC Connection set of SR-HMI, remotely connect SR machine
and SR-HMI 1.5m cable
62 SR-HMI-B monitor operator panel
63 SR-LED simple LED panel
64 SR-RCA 100-240VAC remote control receiver module
65 SR-RCD DC12/24V remote control receiver module
66 SR-TC DC3V remote control emitter
67 SR-USB USB/RS232 convertor (DIN installation)
68 SR-DUSB   the interface between SR and PC USB port (frontispiece plug type)
69 SR-VPA 100-240VAC phone voice module
70 SR-VPD DC12/24V  phone voice module
71 SR-WRT Programming panel
72 SR-TP for connecting SR PLC with text panel SH-300
73 SR-MC MODBUS module
74 SR-MCA MODBUS module
75 SR-MCD MODBUS module
76 SH-300 4.3"STN - LCD Display screen DC12/24VA
77 AR1520  convert RS-232 signals into isolated RS-422 or RS-485
78 AR1520U    Convert USB to RS-232/422/485 terminal
79 AR1521    convert RS-232 signals into isolated RS-422 or RS-485
80 AR1521U     Convert USB to RS-232/422/485 terminal
81 C2400                 Timer,counter,frequency meter,tachometer
82 software PLC software CD
If you have any enquiry about quotation or cooperation,please feel free to email us at sale@yingselectric.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
Product Inquire

Contact Us

Tel:  0086-577-62791815
Fax: 0086-577-62791825
Skype: benjaminying
E-mail:sale@yingselectric.com
Add: NO.126 LIUYANG ROAD, ZHAOYANG INDUSTY ZONE, LIUSHI TOWN, YUEQING CITY, ZHEJIANG, 325604 CHINA

Quick navigation

Contact Us

Product categories

Contact us

  0086-577-62791815

 0086-577-62791825

  benjaminying


  sale@yingselectric.com

 
Copyright © 2016YUEQING YUMO ELECTRIC CO.,LTD All rights reserved.  Sitemap  Xml                                                                                                                       Designed by tqsh.net