You are here: Home » Proximity switch sensor » Infrared ray Sensor » Transmissive Trough beam PHOTO SENSOR


Share to:

Transmissive Trough beam PHOTO SENSOR

The mechanical quantity to be measured, such as displacement, pressure change into an electrical capacitance sensor. Therefore, capacitive sensors can be divided into pole pitch change type, area change type, change the media type categories. Pole pitch change type is generally used to measure the tiny lines or due to force displacement, pressure, vibration caused by the pole pitch changes (see capacitive pressure sensor). Area change type is generally used to measure the angular displacement or larger linear displacement. Change media type commonly used in level measurement and a variety of medium temperature, density determination and humidity.
  • G50
  • YUMO
  • YM0000691

Technical Parameter                                                

Type Free voltage,Relay contact output
 Model  Trough beam
Overall dimensions&dimensions  Trough beam                    Retroreflective              Diffuse
Photoelectric Switch SensorProximity SwitchInfrared ray
Detection distance 15m 0.1m-5m 700mm(200×200mm)
700mm(200×200mm Non glossy white paper)
Detecting distance Φ15mm
Opaque material of Min.Φ15mm
Opaque material of Min.Φ60mm

Transpqrent,Translucent,Opaque distance
Response distance __________________ VR Adjustable by VR
Response speed 20mS   Max:20mS
Power supply voltage 24 to 240VAC±10%50/60Hz,24to240VDC±10%(RippleP-P:Max10%)
Sensitivity __________________ VR Adjustable by VR
Operating Mode Light ON/Dark ON  Selectable Light ON/D or ark ON by slide switch
Control output  Relay output Capacity:30VDC 3A Resistive load,250VAC 3A Resistive load
 Contact orde:1C
Self-diagnostic Output Green LED turns on at unstable operation
imer function
One shot delay by slide switch Delay time:0.1to 5sec.adjustable by VR
Protection IP54(IEC Standard)


Retroreflective sensor.jpg