You are here: Home » Proximity switch sensor » Photoelectric Switch » Infrared ray Sensor » G56 Infrared ray Photoelectric Switch Sensor
Share to:

G56 Infrared ray Photoelectric Switch Sensor

The mechanical quantity to be measured, such as displacement, pressure change into an electrical capacitance sensor. Therefore, capacitive sensors can be divided into pole pitch change type, area change type, change the media type categories. Pole pitch change type is generally used to measure the tiny lines or due to force displacement, pressure, vibration caused by the pole pitch changes (see capacitive pressure sensor). Area change type is generally used to measure the angular displacement or larger linear displacement. Change media type commonly used in level measurement and a variety of medium temperature, density determination and humidity.
  • G56
  • YUMO
  • YM0000664
Availability:


Model explanation of Photoelectric Sensor

 

G56 Photoelectric sensor switch(Infrared Ray Type)

 

1. G: Photoelectric sensor
2. Sub code No.(18, 50, 76.....)
3. Operating voltage(2: 90-250VAC ;3: 10-30VDC; 4: 12-240VDC/24-240VAC; 5: Special voltage)
4. Detection method( A: Diffuse type; B: Mirror reflex type; C: Through beam type)
5. Detection distance (05: 5cm ; 10: 10cm; 30: 30cm; 101: 10m)
6. Output method(N: NPN transistor output; P: PNP transistor output; J: Relay output; L: AC two-line output; S: NPN+PNP)
7. Output status(A: NO; B: NC; C: NO+NC)
8. Auxi function code(T1: Front delay; T2: Rear delay; Y: Oil proof; T: With connector; I: Special requirement)


Feature

1 . Compact volume
2 . high precision of repeated location
3 . Diversified exterior structures
4 . Good performance of anti-interference
5 . Many output forms
6 . High on-off frequency
7 . Dust proof,vibration proof,water proof and oil proof.
8 . With short-circuit protection and inverted connecting protection.
9 . Long service life


Technical Parameter

Model G56
Diffuse Type Dectection Distance
DC 10~30VDC NPN NO
NC
NO+NC
PNP NO
NC
NO+NC
AC 90~250VAC SCR Controllable Silicon NO
NC
Relay Output
Retroreflictive Type Dectection Distance
DC 10~30VDC NPN NO
NC
NO+NC
PNP NO
NC
NO+NC
AC 90~250VAC SCR Controllable Silicon NO
NC
Relay Output
Through beam Type Dectection Distance 17mm
DC 10~30VDC NPN NO G56-3E01NA
NC G56-3E01NB
NO+NC G56-3E01NC
PNP NO G56-3E01PA
NC G56-3E01PB
NO+NC G56-3E01PC
AC 90~250VAC SCR Controllable Silicon NO
NC
Relay Output
Output Current DC 200MA
AC 300MA
Consumption Current lower than 15MA
DC/AC Response time lower than 2MS
Directional Angle 3°~10°
Standard Detected Object Transparent or Opaque body
Working Temperature “-25 deg C~+55 deg C
Intensity of illumination Sunlight under 10000LX, Incandescent lamp under 3000LX
Shell Material Plastic
Protection Grade IP54


Dimension


OVERALL DIMENSIONS

G56 Infrared ray Photoelectric Switch Sensor


Previous: 
Next: