content is empty!
APB-22MRAL
YUMO
YM0005551
Availability: | |
---|---|
APB Series PLC
Features:
Item | APB-12MRD(L) | APB-12MTD(L) | APB-12MGD(L) | APB-22MRA(L) | APB-24MRDL | ||
APB-22MRD(L) | APB-22MTD(L) | APB-22MGD(L) | APB-12MRA(L) | ||||
Surge Immunity | 2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5) | ||||||
Electrostatic Discharge (outer casing) | ±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5) | ||||||
Ambient Temperature | -10℃~+55℃ | ||||||
Storage Temperature | -40℃~+70℃ | ||||||
Ambient Humidity | 5%~95%RH | ||||||
Degree of Protection | IP20(Non-waterproof) | ||||||
Installation | Fixing with M3 screws or Standard DIN rail mounting | ||||||
Dimensions (mm) | 71*99*58.5(12 points);126*99*58.5(22 points);126*99*58.5(24 points) | ||||||
Programming Language | FBD | ||||||
Points | 12 points/22 points/24 points/can support 7 I/O extension modules | ||||||
Memory Capacity | 320 FBDs | ||||||
Filtering Duration of Input Signal | It can be set to improve the stability of signal | ||||||
Real-time Clock | 160h,can place a Li-ion battery if it is necessary | ||||||
Password Protection | Multiple passwords protection | ||||||
High-speed Operation | At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHz | ||||||
Analog Operation | At most 12 voltage 0-10V and 2 current 4-20mA analog inputs, and 2 analog outputs 0/4-20mA | ||||||
Power Failure Protection | Yes | ||||||
Simulate Monitoring | Yes | ||||||
Communication Interface | TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfaces | ||||||
Baud Rate | 9600bps | ||||||
Communication Protocol | MODBUS RTU |
Power Supply | |||||||||
Rated Voltage | DC12-24V | DC12-24V | DC12-24V | AC110-220V | DC12-24V | ||||
Permissible Range | DC11-28V | DC11-28V | DC11-28V | AC85V-265V | DC11-28V | ||||
Power Consumption | 3.5w | -- | -- | -- | -- | ||||
Digital Input | |||||||||
Input Type | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | ||||
Input Signal 0 | DC0-5V | DC0-5V | DC0-5V | AC0-70V | DC0-5V | ||||
Input Signal 1 | DC8.5-28V | DC8.5-28V | DC8.5-28V | AC85-265V | DC8.5-28V | ||||
Isolation | Non-isolation | Non-isolation | Non-isolation | Photoelectric isolation | Non-isolation | ||||
Isolated Group | -- | -- | -- | 14 | -- | ||||
Isolated Voltage | -- | -- | -- | 2500/5000Vr.m.s | -- | ||||
Digital Output | |||||||||
Output Type | Relay | Transistor(NPN) | Transistor(PNP) | Relay | Relay | ||||
Rated Voltage | 24VDC/220VAC | 24VDC | 24VDC | 24VDC/220VAC | 24VDC/220VAC | ||||
Isolation Method | Relay isolation | - | - | Relay isolation | Relay isolation | ||||
Analog Input | |||||||||
Input Type | (DC0-10V)/8 inputs | (DC0-10V)/8 inputs | (DC0-10V)/8 inputs | -- | (4-20mA)/2 inputs | ||||
(DC0-10V)/12 inputs | (DC0-10V)/12 inputs | (DC0-10V)/12 inputs | (DC0-10V)/12 inputs | ||||||
Analog Output | |||||||||
Output Type | -- | -- | -- | -- | 4-20mA/2inputs | ||||
A/D Conversion | -- | -- | -- | -- | 12 bits | ||||
Isolation | Non-isolation | Non-isolation | Non-isolation | Non-isolation | Non-isolation | ||||
High-speed Operation | |||||||||
4 inputs /10KHz | 4 inputs /10KHz | 4 inputs /10KHz | -- | 4 inputs /10KHz | |||||
Input Type | Support single-phase counter and two-phase counter | Support single-phase counter and two-phase counter | Support single-phase counter and two-phase counter | -- | Support single-phase counter and two-phase counter | ||||
2 outputs / 10KHZ | 2 outputs /10KHZ | ||||||||
Output Type | -- | Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse | Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse | -- | -- |
Note: The economical type is supplied without LCD panel, and the basic type is supplied with LCD panel. | |||
APB-12MRD(L) | DC12V-24V | 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports | 4 points relay output |
APB-12MTD(L) | DC12V-24V | 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports | 4 points NPN transistor output |
Q2、Q3 can be high-speed output ports | |||
APB-12MGD(L) | DC12V-24V | 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports | 4 points PNP transistor output |
Q2、Q3 can be high-speed output ports | |||
APB-22MRA(L) | AC100V-240V | 14 points input | 8 points relay output |
APB-22MRD(L) | DC12V-24V | 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports | 8 points relay output |
APB-22MTD(L) | DC12V-24V | 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports | 8 points NPN transistor output |
Q2、Q3 can be high-speed output ports | |||
APB-22MGD(L) | DC12V-24V | 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports | 8 points PNP transistor output |
Q2、Q3 can be high-speed output ports | |||
APB-24MRDL | DC12V-24V | 2points for current input, and 14points for digital input (the first 12 points can be 0~10V analog inputs); I4-I7 can be high-speed ports | 6 points relay output + 2 analog outputs |
APB-22ERA | AC100V-240V | 14 points digital input | 8 points relay output |
APB-22ERD | DC12V-24V | 14 points digital input | 8 points relay output |
APB-22ETD | DC12V-24V | 14 points digital input | 8 point NPN transistor output |
APB-22EGD | DC12V-24V | 14 points digital input | 8 point NPN transistor output |
APB-SMS | supports I/O control and SMS alarm, as well as receives and sends short message in another mode | |||||||
APB-EXPMC | applied in the long-distance signal transmission interface and constitutes a nerwork with 485 bus | |||||||
APB-EXNET | use cable network and TCP/IP protocol to link the remote netw |
APB Series PLC
Features:
Item | APB-12MRD(L) | APB-12MTD(L) | APB-12MGD(L) | APB-22MRA(L) | APB-24MRDL | ||
APB-22MRD(L) | APB-22MTD(L) | APB-22MGD(L) | APB-12MRA(L) | ||||
Surge Immunity | 2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5) | ||||||
Electrostatic Discharge (outer casing) | ±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5) | ||||||
Ambient Temperature | -10℃~+55℃ | ||||||
Storage Temperature | -40℃~+70℃ | ||||||
Ambient Humidity | 5%~95%RH | ||||||
Degree of Protection | IP20(Non-waterproof) | ||||||
Installation | Fixing with M3 screws or Standard DIN rail mounting | ||||||
Dimensions (mm) | 71*99*58.5(12 points);126*99*58.5(22 points);126*99*58.5(24 points) | ||||||
Programming Language | FBD | ||||||
Points | 12 points/22 points/24 points/can support 7 I/O extension modules | ||||||
Memory Capacity | 320 FBDs | ||||||
Filtering Duration of Input Signal | It can be set to improve the stability of signal | ||||||
Real-time Clock | 160h,can place a Li-ion battery if it is necessary | ||||||
Password Protection | Multiple passwords protection | ||||||
High-speed Operation | At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHz | ||||||
Analog Operation | At most 12 voltage 0-10V and 2 current 4-20mA analog inputs, and 2 analog outputs 0/4-20mA | ||||||
Power Failure Protection | Yes | ||||||
Simulate Monitoring | Yes | ||||||
Communication Interface | TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfaces | ||||||
Baud Rate | 9600bps | ||||||
Communication Protocol | MODBUS RTU |
Power Supply | |||||||||
Rated Voltage | DC12-24V | DC12-24V | DC12-24V | AC110-220V | DC12-24V | ||||
Permissible Range | DC11-28V | DC11-28V | DC11-28V | AC85V-265V | DC11-28V | ||||
Power Consumption | 3.5w | -- | -- | -- | -- | ||||
Digital Input | |||||||||
Input Type | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | ||||
Input Signal 0 | DC0-5V | DC0-5V | DC0-5V | AC0-70V | DC0-5V | ||||
Input Signal 1 | DC8.5-28V | DC8.5-28V | DC8.5-28V | AC85-265V | DC8.5-28V | ||||
Isolation | Non-isolation | Non-isolation | Non-isolation | Photoelectric isolation | Non-isolation | ||||
Isolated Group | -- | -- | -- | 14 | -- | ||||
Isolated Voltage | -- | -- | -- | 2500/5000Vr.m.s | -- | ||||
Digital Output | |||||||||
Output Type | Relay | Transistor(NPN) | Transistor(PNP) | Relay | Relay | ||||
Rated Voltage | 24VDC/220VAC | 24VDC | 24VDC | 24VDC/220VAC | 24VDC/220VAC | ||||
Isolation Method | Relay isolation | - | - | Relay isolation | Relay isolation | ||||
Analog Input | |||||||||
Input Type | (DC0-10V)/8 inputs | (DC0-10V)/8 inputs | (DC0-10V)/8 inputs | -- | (4-20mA)/2 inputs | ||||
(DC0-10V)/12 inputs | (DC0-10V)/12 inputs | (DC0-10V)/12 inputs | (DC0-10V)/12 inputs | ||||||
Analog Output | |||||||||
Output Type | -- | -- | -- | -- | 4-20mA/2inputs | ||||
A/D Conversion | -- | -- | -- | -- | 12 bits | ||||
Isolation | Non-isolation | Non-isolation | Non-isolation | Non-isolation | Non-isolation | ||||
High-speed Operation | |||||||||
4 inputs /10KHz | 4 inputs /10KHz | 4 inputs /10KHz | -- | 4 inputs /10KHz | |||||
Input Type | Support single-phase counter and two-phase counter | Support single-phase counter and two-phase counter | Support single-phase counter and two-phase counter | -- | Support single-phase counter and two-phase counter | ||||
2 outputs / 10KHZ | 2 outputs /10KHZ | ||||||||
Output Type | -- | Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse | Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse | -- | -- |
Note: The economical type is supplied without LCD panel, and the basic type is supplied with LCD panel. | |||
APB-12MRD(L) | DC12V-24V | 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports | 4 points relay output |
APB-12MTD(L) | DC12V-24V | 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports | 4 points NPN transistor output |
Q2、Q3 can be high-speed output ports | |||
APB-12MGD(L) | DC12V-24V | 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports | 4 points PNP transistor output |
Q2、Q3 can be high-speed output ports | |||
APB-22MRA(L) | AC100V-240V | 14 points input | 8 points relay output |
APB-22MRD(L) | DC12V-24V | 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports | 8 points relay output |
APB-22MTD(L) | DC12V-24V | 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports | 8 points NPN transistor output |
Q2、Q3 can be high-speed output ports | |||
APB-22MGD(L) | DC12V-24V | 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports | 8 points PNP transistor output |
Q2、Q3 can be high-speed output ports | |||
APB-24MRDL | DC12V-24V | 2points for current input, and 14points for digital input (the first 12 points can be 0~10V analog inputs); I4-I7 can be high-speed ports | 6 points relay output + 2 analog outputs |
APB-22ERA | AC100V-240V | 14 points digital input | 8 points relay output |
APB-22ERD | DC12V-24V | 14 points digital input | 8 points relay output |
APB-22ETD | DC12V-24V | 14 points digital input | 8 point NPN transistor output |
APB-22EGD | DC12V-24V | 14 points digital input | 8 point NPN transistor output |
APB-SMS | supports I/O control and SMS alarm, as well as receives and sends short message in another mode | |||||||
APB-EXPMC | applied in the long-distance signal transmission interface and constitutes a nerwork with 485 bus | |||||||
APB-EXNET | use cable network and TCP/IP protocol to link the remote netw |