 |
Working principle of capacitance proximity switch
The induction surface of capacitance sensor is composed of two coaxial mental electctrodes, which from a capacitor and connected on RC oscillation circuit, just like an open capacitor electrode.
When connecting to power supply, RC oscillator does not work. When an object is clos eto capacitorelectrode, the capacitor capacity will increase, and the oscillator will vibrate. Through the treatment of behind stage circuit, both signals of stop oscillation and oscillation will be converted to switch signs for checking the existence of object. this distance can be obtained, but to nonmetal object, the action distance is d etermined by material dielectric constant, the more dielectric constant, the more action distance will be obtained.
Technical Specifications
| Flush | Detection distance | 0-10mm | ||
| DC6-36V | NPN | NO | CM30-3010NA | |
| NC | CM30-3010NB | |||
| NO+NC | CM30-3010NC | |||
| PNP | NO | CM30-3010PA | ||
| NC | CM30-3010PB | |||
| NO+NC | CM30-3010PC | |||
| AC90-250V | SRC Control label silicon | NO | CM30-2010A | |
| NC | CM30-2010B | |||
| Non-flush | Detection distance | 0-15mm | ||
| DC6-36V | NPN | NO | CM30-3015NA | |
| NC | CM30-3015NB | |||
| NO+NC | CM30-3015NC | |||
| PNP | NO | CM30-3015PA | ||
| NC | CM30-3015PB | |||
| NO+NC | CM30-3015PC | |||
| AC90-250V | SRC Control label silicon | NO | CM30-3015A | |
| NC | CM30-2015B | |||
| Control output | DC | 200mA | ||
| SCR/Relay | 300mA | |||
| Detect object | conductor and dielectric body | |||
| Consumption current | DC<15mA AC<10mA | |||
| Output current | DC:200mA AC:300mA | |||
| Output voltage drop | DC<3V AC<7V | |||
| Response frequency | DC:50HZ AC:10HZ | |||
| Shell material | Resin/Metal | |||
| Working environment temperature | below 25C to 70C | |||
| Insulation resistance | 50MΩ | |||
| Shell meterial | Metal | |||
| Protection grade | IEC standard IP67 | |||
Dimensions(mm)
Working principle of capacitance proximity switch
The induction surface of capacitance sensor is composed of two coaxial mental electctrodes, which from a capacitor and connected on RC oscillation circuit, just like an open capacitor electrode.
When connecting to power supply, RC oscillator does not work. When an object is clos eto capacitorelectrode, the capacitor capacity will increase, and the oscillator will vibrate. Through the treatment of behind stage circuit, both signals of stop oscillation and oscillation will be converted to switch signs for checking the existence of object. this distance can be obtained, but to nonmetal object, the action distance is d etermined by material dielectric constant, the more dielectric constant, the more action distance will be obtained.
Technical Specifications
| Flush | Detection distance | 0-10mm | ||
| DC6-36V | NPN | NO | CM30-3010NA | |
| NC | CM30-3010NB | |||
| NO+NC | CM30-3010NC | |||
| PNP | NO | CM30-3010PA | ||
| NC | CM30-3010PB | |||
| NO+NC | CM30-3010PC | |||
| AC90-250V | SRC Control label silicon | NO | CM30-2010A | |
| NC | CM30-2010B | |||
| Non-flush | Detection distance | 0-15mm | ||
| DC6-36V | NPN | NO | CM30-3015NA | |
| NC | CM30-3015NB | |||
| NO+NC | CM30-3015NC | |||
| PNP | NO | CM30-3015PA | ||
| NC | CM30-3015PB | |||
| NO+NC | CM30-3015PC | |||
| AC90-250V | SRC Control label silicon | NO | CM30-3015A | |
| NC | CM30-2015B | |||
| Control output | DC | 200mA | ||
| SCR/Relay | 300mA | |||
| Detect object | conductor and dielectric body | |||
| Consumption current | DC<15mA AC<10mA | |||
| Output current | DC:200mA AC:300mA | |||
| Output voltage drop | DC<3V AC<7V | |||
| Response frequency | DC:50HZ AC:10HZ | |||
| Shell material | Resin/Metal | |||
| Working environment temperature | below 25C to 70C | |||
| Insulation resistance | 50MΩ | |||
| Shell meterial | Metal | |||
| Protection grade | IEC standard IP67 | |||
Dimensions(mm)
