 |
ADK-F58L10-A8192B4SLP
YUMO
1
China
5V/8-30V
Working Principle
Adopting permanent magnets and magnetic induction elements, the angular displacement of the shaft is converted into an electrical signal output through magneto-electric conversion.
Usage and Characteristics
This product is widely used in a variety of automatic control, monitoring field, measurement field, such as machinery manufacturing, shipbuilding, textile, printing, aviation, military industry, testing machines, elevators and so on. This product has the characteristics of anti-vibration, corrosion resistance, pollution resistance, small size and low cost, high reliability, simple structure and so on.
Description of product model
Flange form for clamping, silk hole mounting, the main size of 38mm; out of the cable for the side of the cable, the shaft diameter of 6mm, single-turn absolute, single-turn resolution of 65536, the operating voltage is 5VDC, the output mode is BISS-C output, the clock frequency of ≤ 5M.
Operating voltage is 5VDC, output mode is BISS-C output, clock frequency ≤ 5M.
BiSS (Bidirectional Synchronous Serial) is a full-duplex synchronous serial communication protocol, the hardware is based on differential signals of RS422 interface, which has become an open international standard communication protocol for encoders. The interface provides fast bi-directional communication and is implemented in hardware (compatible with the industry standard SSI interface). BiSS is suitable for real-time data acquisition and protects the data transfer with safety features such as CRC checksums.
In BiSS communication, the controller (control operation) that collects the data is called BiSS Master and the sensor that provides the data is called BiSS Slave.
Timing diagram:
bit | Marker name | Description | Default value | Length |
N+10 | Ack | Encoder preparation data | 0 | 1bit |
N+9 | Start | Ready to start sending data | 1 | 1bit |
N+8 | CDS | 1-bit low after Start | 0 | 1bit |
N+7 | AP | Data, highs before, lows after | / | Nbit |
7 | Error | incorrect | 1 | 1bit |
6 | Warn | warning | 1 | 1bit |
0~5 | CRC | CRC polynomial: X6+X1+X0,CRC inverse sends the high bit first | / | 6bit |
Timeout | Data is held low and is pulled high to end this communication | / | <40us |
The use of the setpoint line:
When the position line is shorted to the black line, the encoder's current position data will be set to zero, and when the position line is hanging, the encoder counts normally. Use of direction line:
When the direction line is shorted to the black line, the current counting direction of the encoder becomes the opposite direction of the set direction; when the direction line is left blank, the encoder counts in the set direction (the default is to face the encoder axis, rotating the axis clockwise, the data will increase).
Dimension Drawing
Working Principle
Adopting permanent magnets and magnetic induction elements, the angular displacement of the shaft is converted into an electrical signal output through magneto-electric conversion.
Usage and Characteristics
This product is widely used in a variety of automatic control, monitoring field, measurement field, such as machinery manufacturing, shipbuilding, textile, printing, aviation, military industry, testing machines, elevators and so on. This product has the characteristics of anti-vibration, corrosion resistance, pollution resistance, small size and low cost, high reliability, simple structure and so on.
Description of product model
Flange form for clamping, silk hole mounting, the main size of 38mm; out of the cable for the side of the cable, the shaft diameter of 6mm, single-turn absolute, single-turn resolution of 65536, the operating voltage is 5VDC, the output mode is BISS-C output, the clock frequency of ≤ 5M.
Operating voltage is 5VDC, output mode is BISS-C output, clock frequency ≤ 5M.
BiSS (Bidirectional Synchronous Serial) is a full-duplex synchronous serial communication protocol, the hardware is based on differential signals of RS422 interface, which has become an open international standard communication protocol for encoders. The interface provides fast bi-directional communication and is implemented in hardware (compatible with the industry standard SSI interface). BiSS is suitable for real-time data acquisition and protects the data transfer with safety features such as CRC checksums.
In BiSS communication, the controller (control operation) that collects the data is called BiSS Master and the sensor that provides the data is called BiSS Slave.
Timing diagram:
bit | Marker name | Description | Default value | Length |
N+10 | Ack | Encoder preparation data | 0 | 1bit |
N+9 | Start | Ready to start sending data | 1 | 1bit |
N+8 | CDS | 1-bit low after Start | 0 | 1bit |
N+7 | AP | Data, highs before, lows after | / | Nbit |
7 | Error | incorrect | 1 | 1bit |
6 | Warn | warning | 1 | 1bit |
0~5 | CRC | CRC polynomial: X6+X1+X0,CRC inverse sends the high bit first | / | 6bit |
Timeout | Data is held low and is pulled high to end this communication | / | <40us |
The use of the setpoint line:
When the position line is shorted to the black line, the encoder's current position data will be set to zero, and when the position line is hanging, the encoder counts normally. Use of direction line:
When the direction line is shorted to the black line, the current counting direction of the encoder becomes the opposite direction of the set direction; when the direction line is left blank, the encoder counts in the set direction (the default is to face the encoder axis, rotating the axis clockwise, the data will increase).
Dimension Drawing
