 |
APB Series PLC
YUMO
APB-22MTDL
DC12V-24V, 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports, 8 points NPN transistor output
Q2,Q3 can be high-speed output ports, with LCD
 | APB Series PLC |
| Features: | |
Main module: 12\22\24 points; Extension module: 22 points; It | |
| is flexible for extending, and the optimal max. configuration: 7 I/O | |
| extension modules, 1 voice module, and 1 SMS module; | |
Program memory capacity: 320 FBDs, EEPROM; | |
| It is allowed to place a Li-ion battery to power the clock; | |
| Under the circumstance of DC12-24V, the main machine at | |
| most has 12 voltage analog inputs 0-10V, 2 current analog inputs | |
| 4-20mA and 2 analog outputs 4-20mA; | |
| High-speed operation: at most 4 high-speed inputs 10KHZ and | |
| 2 high-speed outputs 10KHZ; | |
| MODBUS protocol, and can be connected to SH-300 (Text | |
| Panel); | |
| New function blocks: pulse width modulation (PWM), pulse | |
| output (PTO), ACC, SMS and analog calculation etc.; |
Technical Parameters | |
| ItemAPB-12MRD(L)APB-12MTD(L)APB-12MGD(L)APB-22MRA(L)APB-24MRDLAPB-22MRD(L)APB-22MTD(L)APB-22MGD(L)APB-12MRA(L) Surge Immunity2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5)Electrostatic Discharge (outer casing)±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5)Ambient Temperature-10℃~+55℃Storage Temperature-40℃~+70℃Ambient Humidity5%~95%RHDegree of ProtectionIP20(Non-waterproof)InstallationFixing with M3 screws or Standard DIN rail mountingDimensions (mm)71*99*58.5(12 points);126*99*58.5(22 points);126*99*58.5(24 points)Programming LanguageFBDPoints12 points/22 points/24 points/can support 7 I/O extension modulesMemory Capacity320 FBDsFiltering Duration of Input SignalIt can be set to improve the stability of signalReal-time Clock160h,can place a Li-ion battery if it is necessaryPassword ProtectionMultiple passwords protectionHigh-speed OperationAt most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHzAnalog OperationAt most 12 voltage 0-10V and 2 current 4-20mA analog inputs, and 2 analog outputs 0/4-20mAPower Failure ProtectionYesSimulate MonitoringYesCommunication InterfaceTTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfacesBaud Rate9600bpsCommunication ProtocolMODBUS RTUPower SupplyRated VoltageDC12-24VDC12-24VDC12-24VAC110-220VDC12-24VPermissible RangeDC11-28VDC11-28VDC11-28VAC85V-265VDC11-28VPower Consumption3.5w--------Digital InputInput TypeNPN/PNPNPN/PNPNPN/PNPNPN/PNPNPN/PNPInput Signal 0DC0-5VDC0-5VDC0-5VAC0-70VDC0-5VInput Signal 1DC8.5-28VDC8.5-28VDC8.5-28VAC85-265VDC8.5-28VIsolationNon-isolationNon-isolationNon-isolationPhotoelectric isolationNon-isolationIsolated Group------14--Isolated Voltage------2500/5000Vr.m.s--Digital OutputOutput TypeRelayTransistor(NPN)Transistor(PNP)RelayRelayRated Voltage24VDC/220VAC24VDC24VDC24VDC/220VAC24VDC/220VACIsolation MethodRelay isolation--Relay isolationRelay isolationAnalog InputInput Type(DC0-10V)/8 inputs(DC0-10V)/8 inputs(DC0-10V)/8 inputs--(4-20mA)/2 inputs(DC0-10V)/12 inputs(DC0-10V)/12 inputs(DC0-10V)/12 inputs(DC0-10V)/12 inputsAnalog OutputOutput Type--------4-20mA/2inputsA/D Conversion--------12 bitsIsolationNon-isolationNon-isolationNon-isolationNon-isolationNon-isolationHigh-speed Operation Input Type4 inputs /10KHz4 inputs /10KHz4 inputs /10KHz--4 inputs /10KHzSupport single-phase counter and two-phase counterSupport single-phase counter and two-phase counterSupport single-phase counter and two-phase counter--Support single-phase counter and two-phase counter Output Type --2 outputs / 10KHZ2 outputs /10KHZ -- --Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulseSupports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse | |
| Type | |
| Note: The economical type is supplied without LCD panel, and the basic type is supplied with LCD panel.APB-12MRD(L)DC12V-24V8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports4 points relay outputAPB-12MTD(L)DC12V-24V8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports4 points NPN transistor outputQ2,Q3 can be high-speed output portsAPB-12MGD(L)DC12V-24V8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports4 points PNP transistor outputQ2,Q3 can be high-speed output portsAPB-22MRA(L)AC100V-240V14 points input8 points relay outputAPB-22MRD(L)DC12V-24V14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports8 points relay output APB-22MTD(L)DC12V-24V14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports8 points NPN transistor outputQ2,Q3 can be high-speed output portsAPB-22MGD(L)DC12V-24V14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports8 points PNP transistor outputQ2,Q3 can be high-speed output portsAPB-24MRDLDC12V-24V2points for current input, and 14points for digital input (the first 12 points can be 0~10V analog inputs); I4-I7 can be high-speed ports6 points relay output + 2 analog outputsAPB-22ERAAC100V-240V14 points digital input8 points relay outputAPB-22ERDDC12V-24V14 points digital input8 points relay outputAPB-22ETDDC12V-24V14 points digital input8 point NPN transistor outputAPB-22EGDDC12V-24V14 points digital input8 point NPN transistor output | |
| Auxiliary Module | |
| APB-SMSsupports I/O control and SMS alarm, as well as receives and sends short message in another modeAPB-EXPMCapplied in the long-distance signal transmission interface and constitutes a nerwork with 485 busAPB-EXNETuse cable network and TCP/IP protocol to link the remote network | |
| Dimensions | |
Take the 12 points module as an example. The 12 points, 22 points, and 24 points modules and other extension modules share the same width and height, the only one difference exists in the length. | |
DC12V-24V, 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports, 8 points NPN transistor output
Q2,Q3 can be high-speed output ports, with LCD
| APB Series PLC |
| Features: | |
Main module: 12\22\24 points; Extension module: 22 points; It | |
| is flexible for extending, and the optimal max. configuration: 7 I/O | |
| extension modules, 1 voice module, and 1 SMS module; | |
Program memory capacity: 320 FBDs, EEPROM; | |
| It is allowed to place a Li-ion battery to power the clock; | |
| Under the circumstance of DC12-24V, the main machine at | |
| most has 12 voltage analog inputs 0-10V, 2 current analog inputs | |
| 4-20mA and 2 analog outputs 4-20mA; | |
| High-speed operation: at most 4 high-speed inputs 10KHZ and | |
| 2 high-speed outputs 10KHZ; | |
| MODBUS protocol, and can be connected to SH-300 (Text | |
| Panel); | |
| New function blocks: pulse width modulation (PWM), pulse | |
| output (PTO), ACC, SMS and analog calculation etc.; |
Technical Parameters | |
| ItemAPB-12MRD(L)APB-12MTD(L)APB-12MGD(L)APB-22MRA(L)APB-24MRDLAPB-22MRD(L)APB-22MTD(L)APB-22MGD(L)APB-12MRA(L) Surge Immunity2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5)Electrostatic Discharge (outer casing)±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5)Ambient Temperature-10℃~+55℃Storage Temperature-40℃~+70℃Ambient Humidity5%~95%RHDegree of ProtectionIP20(Non-waterproof)InstallationFixing with M3 screws or Standard DIN rail mountingDimensions (mm)71*99*58.5(12 points);126*99*58.5(22 points);126*99*58.5(24 points)Programming LanguageFBDPoints12 points/22 points/24 points/can support 7 I/O extension modulesMemory Capacity320 FBDsFiltering Duration of Input SignalIt can be set to improve the stability of signalReal-time Clock160h,can place a Li-ion battery if it is necessaryPassword ProtectionMultiple passwords protectionHigh-speed OperationAt most 4 high-speed inputs 10KHz, and 2 high-speed outputs 10KHzAnalog OperationAt most 12 voltage 0-10V and 2 current 4-20mA analog inputs, and 2 analog outputs 0/4-20mAPower Failure ProtectionYesSimulate MonitoringYesCommunication InterfaceTTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfacesBaud Rate9600bpsCommunication ProtocolMODBUS RTUPower SupplyRated VoltageDC12-24VDC12-24VDC12-24VAC110-220VDC12-24VPermissible RangeDC11-28VDC11-28VDC11-28VAC85V-265VDC11-28VPower Consumption3.5w--------Digital InputInput TypeNPN/PNPNPN/PNPNPN/PNPNPN/PNPNPN/PNPInput Signal 0DC0-5VDC0-5VDC0-5VAC0-70VDC0-5VInput Signal 1DC8.5-28VDC8.5-28VDC8.5-28VAC85-265VDC8.5-28VIsolationNon-isolationNon-isolationNon-isolationPhotoelectric isolationNon-isolationIsolated Group------14--Isolated Voltage------2500/5000Vr.m.s--Digital OutputOutput TypeRelayTransistor(NPN)Transistor(PNP)RelayRelayRated Voltage24VDC/220VAC24VDC24VDC24VDC/220VAC24VDC/220VACIsolation MethodRelay isolation--Relay isolationRelay isolationAnalog InputInput Type(DC0-10V)/8 inputs(DC0-10V)/8 inputs(DC0-10V)/8 inputs--(4-20mA)/2 inputs(DC0-10V)/12 inputs(DC0-10V)/12 inputs(DC0-10V)/12 inputs(DC0-10V)/12 inputsAnalog OutputOutput Type--------4-20mA/2inputsA/D Conversion--------12 bitsIsolationNon-isolationNon-isolationNon-isolationNon-isolationNon-isolationHigh-speed Operation Input Type4 inputs /10KHz4 inputs /10KHz4 inputs /10KHz--4 inputs /10KHzSupport single-phase counter and two-phase counterSupport single-phase counter and two-phase counterSupport single-phase counter and two-phase counter--Support single-phase counter and two-phase counter Output Type --2 outputs / 10KHZ2 outputs /10KHZ -- --Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulseSupports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse | |
| Type | |
| Note: The economical type is supplied without LCD panel, and the basic type is supplied with LCD panel.APB-12MRD(L)DC12V-24V8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports4 points relay outputAPB-12MTD(L)DC12V-24V8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports4 points NPN transistor outputQ2,Q3 can be high-speed output portsAPB-12MGD(L)DC12V-24V8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports4 points PNP transistor outputQ2,Q3 can be high-speed output portsAPB-22MRA(L)AC100V-240V14 points input8 points relay outputAPB-22MRD(L)DC12V-24V14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports8 points relay output APB-22MTD(L)DC12V-24V14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports8 points NPN transistor outputQ2,Q3 can be high-speed output portsAPB-22MGD(L)DC12V-24V14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports8 points PNP transistor outputQ2,Q3 can be high-speed output portsAPB-24MRDLDC12V-24V2points for current input, and 14points for digital input (the first 12 points can be 0~10V analog inputs); I4-I7 can be high-speed ports6 points relay output + 2 analog outputsAPB-22ERAAC100V-240V14 points digital input8 points relay outputAPB-22ERDDC12V-24V14 points digital input8 points relay outputAPB-22ETDDC12V-24V14 points digital input8 point NPN transistor outputAPB-22EGDDC12V-24V14 points digital input8 point NPN transistor output | |
| Auxiliary Module | |
| APB-SMSsupports I/O control and SMS alarm, as well as receives and sends short message in another modeAPB-EXPMCapplied in the long-distance signal transmission interface and constitutes a nerwork with 485 busAPB-EXNETuse cable network and TCP/IP protocol to link the remote network | |
| Dimensions | |
Take the 12 points module as an example. The 12 points, 22 points, and 24 points modules and other extension modules share the same width and height, the only one difference exists in the length. | |
