HOKUYO MBF-36T MBF-36R Microwave Type Level Sensor
Product Description
HOKUYO MBF-36T MBF-36R Microwave Type Level Sensor
Feature
This device is a through-beam type microwave sensor. This is suitable for waste level detection in hopper at waste processing facility.
HOKUYO FB-10C/10M
| Model No. | MBF-36T(Transmitter) | MBF-33T(Transmitter) |
| MBF-36R(Receiver) | MBF-33R(Receiver) | |
| Applied microwave | 24.15GHz | |
| Oscillating output | 10mW or less | |
| Setting distance | 5m or less(Max.50m for reference, 10m when adaptor is used) *1 | |
| Control output(Receiver) | 1C relay, excited when microwave is received(250VAC 4A cosφ=1, 30VDC 3A) | |
| Timer | ON delay, adjustable during 0.1 to 10sec | |
| Power source | 24VDC(18 to 30VDC both projector and receiver) | 100 to 230VAC(85 to 250VAC) 50/60Hz(both projector and receiver) |
| Power consumption | 3W or less : transmitter | 3.2VA or less : transmitter |
| 4W or less : receiver | 4VA or less : receiver | |
| Ambient temperature | -10 to +55 degrees C | |
| Ambient humidity | 45 to 85%RH | |
| Vibration resistance | Double amplitude 1.5mm 10 to 55Hz each 2 hour in X, Y and Z direction | |
| Impact resistance | 196m/s2 , Each 3 time in X, Y and Z directions | |
| Insulation resistance | 20MΩ or more(by 250VDC megger) | 20MΩ or more(by 500VDC megger) |
| between power/contact output and case | between power/contact output and case | |
| Protective structure | IP64(IEC standard) | |
| Installation | Flange installation(in conformity with JIS B2210, nominal diameter 65) | |
| Case material | Body : aluminum die-casting, cover : acrylic resin | |
| Weight | Each approx. 2.5kg | |
| *1 When the installation distance between projector and receiver is less than 2.5m, it may not detect anything depending on types of refuse due to the input signal can be strong. In that case, please insert the accessary adaptor to the space between the receiver and the flange with antenna. | ||