HOKUYO EWF-_E OPTICAL DATA TRANSMISSION DEVICE
Product Description
HOKUYO EWF-_E OPTICAL DATA TRANSMISSION DEVICE
Feature
100Mbps optical repeater that can connect to the Ethernet line directly.
Setting of MAC address or IP is not required and it can be used as LAN cables.
Non-contact communication is available for up to 100m between moving devices.
Specifications
Model No. | EWF-0EA-01/0EB-01 | EWF-1EA-01/1EB-01 |
| Transmission distance | 50m | 100m |
| Directional angle | Full angle 1.4° | Full angle 0.7° |
| Power source | 24VDC(±10%) | |
| Current consumption | 150mA(24VDC) | |
| Transmission system | Full-duplex two-way transmission | |
| Transmission speed | 100Mbps | |
| Laser safety standard | Class 2M | |
| Interface | Ethernet | |
| Communication standerd | IEEE802.3u 100BASE-TX Auto-negotiation compliant | |
| Modulation system | Direct modulation | |
| Connection | Mini clamp connector(Power/CD signal),Modular jack RJ-45(Ethernet) | |
| Ambient temperature/humidity | -10°C to +50°C,85%RH or less(non icing) | |
| Ambient illuminance | 10000lux or less(Halogen/mercury lamp) | |
| Impact resistance | 490m/s2, Each 10 times in X, Y and Z directions | |
| Vibration resistance | Double amplitude 1.5mm,10 to 55Hz,each 2 hours in X, Y and Z direction | |
| Protective structure | IP40 | |
| Reception output(CD) | Photo-coupler open-cellector(Withstand pressure 35V), ON when receiving light(Max.50mA, residual voltage 1.5V) | |
| Level voltage output(Analog output) | Approx.0 to 3V, connector S2B-PH-K-S(JST) | |