SR-12MGDC Power supply DC12-24V 8 point DC input (6 point analog) 4 point transistor (equivalent PNP) output PLC
Product Description
Performance & Features：
■ This intelligent controller, adopting function block programming, having large programming capacity, being freely programmed according to different users and different fields, can run at your desired time table and the RTC accuracy can reach second and makes your time control more accurate. And up to 128 time sessions can
be set , especially suitable for time-control system."
■ Safety password function makes your program absolutely safe. Before writing program, password can be set. And only after entering the correct password, can the program be modified.
■ It is equipped with a removable, convenient and programmable LCD, providing 64 friendly human-machine interfaces, 32 virtual keys, having the function to display the alarming message and parameter and to modify the parameter. When needed, it can be installed. And when not needed, it can be removed and replaced with an ordinary front panel.Thus the cost will be greatly reduced.
■ The input can receive not only the digital input but also the analogue input to perform the control and . transmission of
fthe temperature, moisture, pressure, flow level unit and so on."
■ It has well-featured and compact design with 8 point input and 4 point output. Equipped with expansion module, it can be expanded into 82 I/O better ,and to MAX 122I/O.It can be connected with telephone voice module and remote control module to perform the notification and alarming function. And the connection between the host and the module can be Bridge SR-CBA or flexible connection SR-ECBA.
■ The machine has short-circuit protection (internal) and relay output protection (external) function, which makes your usage safer and easier.
Technical Index：
Installation Dimensions & Wiring Diagram：
| Power supply | |
| Power | DC12V-24V |
| Input parameters: | |
| Input No | 8(A0-A5,B4-B5) |
| Digital input | 8(A0-A5,B4-B5) |
| Analogue input | 6(A0-A5) |
| Power range | DC0-24V(digital)/DC0-10V(analogue) |
| Input signal0 | DC0-5V |
| Input signal1 | DC10-24V |
| Output parameters: | |
| Output No | 4(QA0-QA3) |
| Output type | Transistor (PNP)output |
| Output voltage | DC0-24V |
| Output current | 2A |
| Environment temperature: | |
| Running temperature | 0℃～55℃ |
| Storage/shipment | -40℃～70℃ |
| Switch frequency: | |
| Mechanism | 10Hz |
| Resistor/light load | 2Hz |
| Sensitive load | 0.5Hz |
| Other parameters: | |
| Clock buffer memory at 25℃ | 80h |
| RTC accuracy | Max±5s/day |
| Protection | IP20 |
| Emission on line | EN55011(B) |
| The main frequency range | 47-63Hz |
| Function block No | 128BIT |
| Program storage capacity | 64K |
| Isolation intensity | IEC1131 |
Installation Dimensions & Wiring Diagram：
SR intelligent controller is a new type of programmable controller with FBD (Function Block Diagram) programming, which is simpler and easier to learn than the conventional PLC (ladder diagram and instruction).
In the design concept of SR series products, SR-WRT is used as a programming panel to program SR series hosts. On the other hand, SR-HMI is used as a powerful simple Human-Machine Interface to display the status of SR series, and SR-HMI itself is programmable. If you want to program SR by PC, free programming software “Super CAD” with powerful functions is provided.
SR can be used to combine voice modules of SR-VPA, SR-VPD and remote control modules of SR-RCA, SR-RCD; it can perform telephone remote controlling, wireless controlling, voice prompting and auto-dialing functions. Being used with expansion module (SR-20ERA, SR-20ERD, SR-20ETD, SR-20EGD), the input/output points can be expanded to satisfy your requirements. Mostly one SR machine can be connected with five extension modules at most, (it is better you connect with the 3 extension modules) and there are 122 I/O points (74 inputs and 48 outputs) at most.
SR intelligent controller is widely used in automatic control field of industry, agriculture, and automatic house control, which really comes into every part of people's daily life.
Product Description
| Item | Code | Description |
| 1 | AF-10MR-A(with LCD) | 85V-240VAC, 6 points AC input 4 points relay output |
| 2 | AF-10MR-A(without LCD) | 85V-240VAC, 6 points AC input 4 points relay output |
| 3 | AF-10MR-D(with LCD) | DC12/24V, 6points DC input 4 points (with analog input) relay output |
| 4 | AF-10MR-D(without LCD) | DC12/24V, 6points DC input 4 points (with analog input) relay output |
| 5 | AF-10MR-E(with LCD) | DC12/24V, 6 points DC input 4 points relay output |
| 6 | AF-10MR-E(without LCD) | DC12/24V, 6 points DC input 4 points relay output |
| 7 | AF-10MT-D(with LCD) | DC12/24V, 6points DC input 4 points transistor output(exuivalent NPN) |
| 8 | AF-10MT-D(without LCD) | DC12/24V, 6points DC input 4 points transistor output(exuivalent NPN) |
| 9 | AF-10MT-GD(with LCD) | DC12/24V, 6points DC input 4 points transistor output(exuivalent PNP) |
| 10 | AF-10MT-GD(without LCD) | DC12/24V, 6points DC input 4 points transistor output(exuivalent PNP) |
| 11 | AF-10MT-E(with LCD) | DC12/24V,6 points DC input 4 points electronic transistor output |
| 12 | AF-10MT-E(without LCD) | DC12/24V,6 points DC input 4 points electronic transistor output |
| 13 | AF-20MR-A(with LCD) | 85V-240VAC ,12 points AC input 8 points relay output |
| 14 | AF-20MR-A(without LCD) | 85V-240VAC ,12 points AC input 8 points relay output |
| 15 | AF-20MR-D(with LCD) | DC12/24V,12 points DC input 8 points (with analog input) relay output |
| 16 | AF-20MR-D(without LCD) | DC12/24V,12 points DC input 8 points (with analog input) relay output |
| 17 | AF-20MR-E(with LCD) | DC12/24V ,12 points DC input 8 points relay output (without analog input) |
| 18 | AF-20MR-E(without LCD) | DC12/24V ,12 points DC input 8 points relay output (without analog input) |
| 19 | AF-20MT-E(with LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent NPN) |
| 20 | AF-20MT-E(without LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent NPN) |
| 21 | AF-20MT-D(with LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent NPN) |
| 22 | AF-20MT-D(without LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent NPN) |
| 23 | AF-20MT-GD(with LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent PNP) |
| 24 | AF-20MT-GD(without LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent PNP) |
| 25 | AF-C232 | Cable for FAB and PC Modem for programming |
| 26 | AF-C485 | Interface between 485bus and FAB for network monitor |
| 27 | AF-CMP | The cable connect to the telephone module port "TO PC' |
| 28 | AF-COPY | Copy module |
| 29 | AF-D232 | the cable connecting FAB and PC (frontispiece plug type) |
| 30 | AF-MUL-D | Voice module to realize voice function(DC POWER) |
| 31 | AF-DUSB | the interface between FAB and PC USB port (frontispiece plug type) |
| 32 | AF-LCD | Removable LCD clip in screen for easy programming |
| 33 | AF-M232 | Interface between FAB and MODEM for remote control and programming |
| 34 | AF-MUL | Voice module to realize voice function(AC POWER) |
| 35 | AF-P485 | Interface between 485bus and PC for network function |
| 36 | AF-S485 | Interface is the connector between RS232 and RS485 (DIN installation). |
| 37 | AF(SR)-USB | USB/RS232 convertor (DIN installation) |
| 38 | SP-05AL | Input: 110/220VAC Output: Voltage :5VDC Current :14A Din rail type |
| 39 | SP-05AS | Input: 110/220VAC Output: Voltage :5VDC Current :7A Din rail type |
| 40 | SP-12AL | Input: 110/220VAC Output: Voltage :12VDC Current :6A Din rail type |
| 41 | SP-12AS | Input: 110/220VAC Output: Voltage :12VDC Current :3A Din rail type |
| 42 | SP-24AL | Input: 110/220VAC Output: Voltage :24VDC Current :3A Din rail type |
| 43 | SP-24AS | Input: 110/220VAC Output: Voltage :24VDC Current :1.5A Din rail type |
| 44 | SR-12MRAC | 100-240VAC 8 Points AC input, 4 points relay output |
| 45 | SR-12MRDC | DC12/24V 8 points DC input (with 6 points analog ) , 4 points relay output |
| 46 | SR-12MTDC | DC12/24V 8 points DC input (with 6 points analog ) , 4 points transistor output(NPN) |
| 47 | SR-12MGDC | DC12/24V 8 points DC input (with 6 points analog ) , 4 points transistor output(PNP) |
| 48 | SR-20ERA | 100-240VAC 12 AC input, 8 points relay output, 20 points extended module |
| 49 | SR-20ERD | DC12/24V 12 points DC input , 8 points relay output, 20 points extended module |
| 50 | SR-20ETD | DC12/24V 12 points DC input , 8 points transistor output ,20 points extended module (NPN) |
| 51 | SR-20EGD | DC12/24V 12 points DC input , 8 points transistor output ,20 points extended module (PNP) |
| 52 | SR-22MRAC | 100-240VAC 14 Points AC input, 8points relay output |
| 53 | SR-22MRDC | DC12/24V 14 points DC input (with 8 points analog ) , 8 points relay output |
| 54 | SR-22MTDC | DC12/24V 14 points DC input (with 8 points analog ) , 8 points transistor output(NPN) |
| 55 | SR-22MGDC | DC12/24V 14 points DC input (with 8 points analog ) , 8 points transistor output(PNP) |
| 56 | SR-AUD | The recording microphone and the wires between the sound card and the SR-VPA/SR-VPD |
| 57 | SR-CP | Programmable cable can edit,analog, monitor from PC to Super Relay |
| 58 | SR-EANT | Long connecting antenna of SR-RCA and SR-RCD |
| 59 | SR-ECBA | AC type, to remotely connect the machine and the extended module |
| 60 | SR-ECBD | DC type, to remotely connect the machine and the extended module |
| 61 | SR-EHC | Connection set of SR-HMI, remotely connect SR machine and SR-HMI 1.5m cable |
| 62 | SR-HMI-B | monitor operator panel |
| 63 | SR-LED | simple LED panel |
| 64 | SR-RCA | 100-240VAC remote control receiver module |
| 65 | SR-RCD | DC12/24V remote control receiver module |
| 66 | SR-TC | DC3V remote control emitter |
| 67 | SR-USB | USB/RS232 convertor (DIN installation) |
| 68 | SR-DUSB | the interface between SR and PC USB port (frontispiece plug type) |
| 69 | SR-VPA | 100-240VAC phone voice module |
| 70 | SR-VPD | DC12/24V phone voice module |
| 71 | SR-WRT | Programming panel |
| 72 | SR-TP | for connecting SR PLC with text panel SH-300 |
| 73 | SR-MC | MODBUS module |
| 74 | SR-MCA | MODBUS module |
| 75 | SR-MCD | MODBUS module |
| 76 | SH-300 | 4.3"STN - LCD Display screen DC12/24VA |
| 77 | AR1520 | convert RS-232 signals into isolated RS-422 or RS-485 |
| 78 | AR1520U | Convert USB to RS-232/422/485 terminal |
| 79 | AR1521 | convert RS-232 signals into isolated RS-422 or RS-485 |
| 80 | AR1521U | Convert USB to RS-232/422/485 terminal |
| 81 | C2400 | Timer,counter,frequency meter,tachometer |
| 82 | software | PLC software CD |