Mini PLC Small Relay PR6 Series Programmable Relay XLogic Model with Non-expandable PR-6DC-DA-R
Product Description
PR-6 Series CPU | |||||||||
Model | Expansion | Supply volt | Inputs | Outputs | High-speed count | PWM | HMI | RTC | G . W(G) |
PR-6AC-R | NO | AC 110～240V | 4 DI | 2 relays(10A) | NO | NO | NO | YES | 180 |
PR-6DC-DA-R | NO | DC12V-24V | 4 DI(I1-I4) | 2 relays(10A) | NO | NO | NO | YES | 180 |
GENERAL SPECIFICATIONS
Timers : 64
Counters : 64
Function Blocks: 64
Operation temp. : -20℃-55℃
Storage:-40℃-70℃
Protection: IP20
RTC accuracy : MAX ±2S/day
RTC time interval : 64
RTC Backup at 25 °C : 20 days
Program and settings Backup :10 years
Data Power-off retentivity : No
Cycle time: typ. 0.6ms to 8.0ms
Dimensions: 48*90*64 (Unit, mm）
Certificate: CE, C-UL, RoSH, REACH
Installation:35mm- DIN rail or screw for installation
Expansion capacity: No
Password protection :4-digit number password protection or disable program upload function
Communication interface : TTL interface , 1 Program/RS232 port
Communication protocol : Modbus RTU/ASCII
Technical Index
Power supply: | |
Nominal voltage | DC 12-24V |
Operating limits | DC 10.8-28.8V |
Immunity from micro power cuts | Typ.5 ms |
Max. Startup current | Max. 0.25A |
Max. absorbed power | 1.1 W (10.8V dc) ; 1.2W (28.8V dc) |
Protection against polarity inversions | Yes |
Input parameters: | |
Input No | 4 ( I1-I4 ) |
Digital input | 4 ( I1-I4 ) |
Analogue input | 4 ( I1-I4)(0..10V DC) |
Inputs used as digital inputs( I1-I4 ) | |
Input voltage | DC0-28.8V |
Input signal0 | < 5V DC;<0.1mA |
Input signal1 | >8 V DC;>0.3mA |
Input current | 0.4mA @ 10.8V dc |
Response time | 0 to 1 ：Typ. 1.5 ms ；1 to 0 ：Typ. 1.5 ms |
Maximum counting frequency | Typ.：4 HZ |
Sensor type | Contact or 3-wire PNP |
Input type | Resistive |
Isolation between power supply and inputs | None |
Isolation between inputs | None |
Inputs used as analog inputs( I1-I4 ) | |
Measurement range | DC 0---10V |
Input impedance | Min, 24KΩ ; Max. 72KΩ |
Input voltage | 28.8 V DC max |
Resolution | 9bit ,0.015V |
Accuracy at 25 °C | ± (Max.0.03)V |
Accuracy at 55 °C | ± (Max.0.06)V |
Isolation between analog channel and power supply | None |
Cable length | 10 m max. shielded and twisted |
Output parameters: | |
Output No. | 2 (Q1-Q2) |
Output type | Relay output |
Max. Allowable Power Force | CE: 10A,250V AC/DC30V |
Electrical durability Expectancy | 105 Operations at Rated Resistive Load |
Mechanical life | 107 Operations at No Load condition |
Response time | Operate Time : 15 mSec. Max. |
Built-in protections | Against short-circuits: None |
Switch frequency: | |
Mechanism | 10Hz |
Resistor/light load | 2Hz |
Sensitive load | 0.5Hz |
Other parameters: | |
Weight | Approx.180g |
Installation Dimensions
Wiring Diagram
Input(Digital&Analog 0..10V) & Ouptput(Relay) :