LAY5-EA42 Plastic Flush Flat Electrical Circuits Control Red Head Push Button Switch
Product Description
Product Application
The push button series are used in controlling circuit of AC voltage up to 660V/AC50Hz or 60Hz,and DC voltgae below 400V.It is used for controlling signal and interlocking purposes.The main body of the push buttons adopts zinc alloy and high-grade anti-flam plastic.The contact adopts special silver alloy in order to enjoy the benefit of high anti-electrical erosion.The signal lamp series are suitable for electrical appliances circuit of AC voltage up to 380V/50Hz,and DC voltage below 380V.It is ideal for using as indicating signals,warning signal,emergency signal,etc.Our products comply with GB/T14048.1 and IEC60947-5-1,all prouducts are CE,IOS9001,ROSH and UL certified.
Work environment
Surrounding temperature:-25℃~+55℃;
Air relative humidity:≤85%.
It can be normally work under following condition: Vibration frequency is 2~80Hz and acceleration speed is 0.7g/h;
Pollution grade is Ⅲ, installation sort is Ⅲ, protection grade is up to IP65.
Altitude:≤2000m
Main technical parameter | ||
Basic technical parameter of button | ||
Rated insulation | AC 600V(50Hz/60Hz) | |
Conventional heating current | 10A | |
Insulation resistance | ≥50MΩ | |
Contact resistance | ≤25MinΩ | |
Mechanical life | 100x10000 pushbutton | 50x10000 selector switch |
Electrical life | 500x10000 pushbutton | 25x10000 selector switch |
Description | Contact | Circuit | Color | Sign Type | Contour |
Flush button | N/O | White | LAY5-EA11 | ||
Black | LAY5-EA21 | ||||
Green | LAY5-EA31 | ||||
Yellow | LAY5-EA51 | ||||
Blue | LAY5-EA61 | ||||
N/C | Red | LAY5-EA42 |