EDR-150-24 Meanwell 150W Single Output Industrial DIN RAIL Switching Power Supply
Product Description
Features
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage/ Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5or 15
UL 508 (industrial control equipment) approved
EN61000-6-2(EN50082-2) industrial immunity level
100% full load burn-in test
2 years warranty
Applications
Industrial control system
Semiconductor fabrication equipment
Factory automation
Electro-mechanical apparatus
Description
EDR-150-24 is one economical slim DIN rail power supply series, providing up to 156W at 230VAC input. This series is adapt to be installed on TS-35/7.5 or TS -35/15 mounting rails. The body is designed 40mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2(≤80% Load), the norm the European Union regulates for harmonic current.
EDR-150-24 is designed with metal housing that enhances the unit's power dissipation. With working efficiency up to 87%,the entire series can operate at the ambient temperature between -20C and 60"C under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control . apparatus (UL508, TUV EN62368-1, and etc.) make EDR-1 50-24 a very competitive power supply solution for industrial applications.
SPECIFICATION
| MODEL | EDR-150-24 | |
| OUTPUT | DC VOLTAGE | 24V |
| RATED CURRENT | 6.5A/230VAC 5.2A/115VAC | |
| CURRENT RANGE | 0~6.5A/230VAC 0~5.2A/115VAC | |
| RATED POWER | 156W/230VAC 125W/115VAC | |
| RIPPLE & NOISE (max.) Note.2 | 150mVp-p | |
| VOLTAGEADJ. RANGE | 24~28V | |
| VOLTAGE TOLERANCE Note.3 | ±1.0% | |
| LINE REGULATION | ±0.5% | |
| LOAD REGULATION | ±1.0% | |
| SETUP, RISE TIME | 1500ms, 60ms/230VAC 3000ms, 60ms/115VAC at full load | |
| HOLD UPTIME (Typ.) | 16ms/230VAC 10ms/115VAC at full load | |
| INPUT | VOLTAGE RANGE Note.6 | 90~264VAC 127~370VDC [DC input operation possible by connectingAC/L(+),AC/N(-)] |
| FREQUENCYRANGE | 47~63Hz | |
| EFFICIENCY(Typ.) | 87% | |
| AC CURRENT (Typ.) | 2.6A/115VAC 1.7A/230VAC | |
| INRUSH CURRENT (Typ.) | 20A/115VAC 35A/230VAC | |
| LEAKAGE CURRENT | <1mA/ 240VAC | |
| PROTECTION | OVERLOAD Note.7 | 105 ~ 130% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed / 230VAC |
| 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed / 115VAC | ||
| OVER VOLTAGE | 29~33V | |
| Protection type : Shut down o/p voltage, re-power on to recover | ||
| OVER TEMPERATURE | Shut down o/p voltage, re-power on to recover | |
| ENVIRONMENT | WORKING TEMP. | -20℃~+60℃(Refer to "Derating Curve") |
| WORKING HUMIDITY | 20~95% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40~+85 , 10~95% RH | |
| TEMP. COEFFICIENT | ±0.03% /℃(0 ~ 50 ) | |
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X,Y, Z axes; Mounting: Compliance to IEC60068-2-6 | |
SAFETY&EMC (Note 4) | SAFETYSTANDARDS | Ul508,TUV EN62368-1, , BSMI CNS14336-1 approved;(meet EN60204-1) |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25 / 70% RH | |
| EMC EMISSION | Compliance to EN55032 (CISPR32) ClassA, EN61000-3-2, ClassA( 80% Load), EN61000-3-3, ClassA | |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteriaA, EAC TP TC 020 | |
| OTHERS | MTBF | 472.5K hrs min. MIL-HDBK-217F (25℃) |
| DIMENSION | 40*125.2*113.5mm (W*H*D) | |
| PACKING | 0.6Kg; 20pcs/13Kg/1.16CUFT | |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47ut pall capacitor. 3. Tolerance ; includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be nstalledl into a final equipment. The final equipment must be re-confirmed that it sil mets EMC directives. 5. Intallation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanenty with full power, In case the adjacent device is a heat source, 15mm clearance is recommended. 6. Derating may be needed under low input voltage. Please check the derating curve for more details. 7. Hiccup mode al 90~100VAC, recovers automatically atter fault condition is removed, 8. The ambient temperature derating of 3.5"C/1000m with fanless models and of 5C/1000m with fan models for operating altude higher than 200m(6500t). | |
Mechanical Specification(mm)