AF-10MT-GD2 Programmable Logic Controller plc controller PLC
Product Description
AF-10MT-GD2
DC12/24V, 6points DC input 4 points transistor output(exuivalent PNP)
Performance&Features | |
This model is a DC12/24V, 6points DC input 4 points transistor output(exuivalent PNP) | |
Exquisite and compact design | |
Multi-functional, easy operating, convenient, easy learning | |
Technical Index | |
Operation temperature: :-20℃-70℃ | Timers :127 |
Storage/Transportation -40℃-70℃ | Counters :127 |
Protection:IP20 | Function blocks : 127 |
Interference Regulation: EN55011(B Class) | RTC time intervals:127 |
RTC accuracy: MAX ±5S/day | Storage capacity:64K |
Certificate:CE | Insulation Intensity: IEC1131 |
Installation: Use a standard DIN rail or screw for installation | Dimensions:90*126*58(Unit:mm ) |
Power supply | |
Rated voltage:DC12/24V | Main voltage operation range: AC10-28V |
DC24V consumption: Typical 200mA | (Output full-load):Typical 5W |
Digital input | |
Signal 0:DC 0-5V | Input current:<0.4mA |
Signal 1:DC 10-24V | Input current:<1mA |
Analogue input | |
Signal 1:0-10V | Input current:<0.3mA |
Outputs(Digital output) | |
Output type: Relay output | Wiring insulation: Yes |
Points per set:1 | Continuous current max value:MAX 10A |
Switch frequency | |
Mechanism: 10Hz | Resistor load: 2Hz |
Inductive load: 0.5Hz |
FAB Intelligent Controller Series is a new programmable controller launched by YUMO, with the programming by FBD (Function Block Diagram) , which is simpler and easier to learn than the conventional PLC (ladder diagram and instruction). In the design concept of YUMO FAB series products, traditional separated controller of PLC is combined with the writer on which the program can be written directly by using the function keys on the LCD front panel in order to reduce the cost and bring convenience to users. YUMO FAB is very compact and light-weighted, especially suitable for internal installation usage.
In addition, FAB intelligent controller series can perform the local and remote Internet communication and monitoring. And FAB can be used with voice module to perform telephone remote control, voice prompting, auto-dialing and other functions. At present, the YUMO FAB is widely used in various areas such as industry, agriculture and automatic house control. It can be used almost everywhere
Powerful Network Function
Short distance network wiring (Within 1.2KM)
Product Description
Item | Code | Description |
1 | AF-10MR-A(with LCD) | 85V-240VAC, 6 points AC input 4 points relay output |
2 | AF-10MR-A(without LCD) | 85V-240VAC, 6 points AC input 4 points relay output |
3 | AF-10MR-D(with LCD) | DC12/24V, 6points DC input 4 points (with analog input) relay output |
4 | AF-10MR-D(without LCD) | DC12/24V, 6points DC input 4 points (with analog input) relay output |
5 | AF-10MR-E(with LCD) | DC12/24V, 6 points DC input 4 points relay output |
6 | AF-10MR-E(without LCD) | DC12/24V, 6 points DC input 4 points relay output |
7 | AF-10MT-D(with LCD) | DC12/24V, 6points DC input 4 points transistor output(exuivalent NPN) |
8 | AF-10MT-D(without LCD) | DC12/24V, 6points DC input 4 points transistor output(exuivalent NPN) |
9 | AF-10MT-GD(with LCD) | DC12/24V, 6points DC input 4 points transistor output(exuivalent PNP) |
10 | AF-10MT-GD(without LCD) | DC12/24V, 6points DC input 4 points transistor output(exuivalent PNP) |
11 | AF-10MT-E(with LCD) | DC12/24V,6 points DC input 4 points electronic transistor output |
12 | AF-10MT-E(without LCD) | DC12/24V,6 points DC input 4 points electronic transistor output |
13 | AF-20MR-A(with LCD) | 85V-240VAC ,12 points AC input 8 points relay output |
14 | AF-20MR-A(without LCD) | 85V-240VAC ,12 points AC input 8 points relay output |
15 | AF-20MR-D(with LCD) | DC12/24V,12 points DC input 8 points (with analog input) relay output |
16 | AF-20MR-D(without LCD) | DC12/24V,12 points DC input 8 points (with analog input) relay output |
17 | AF-20MR-E(with LCD) | DC12/24V ,12 points DC input 8 points relay output (without analog input) |
18 | AF-20MR-E(without LCD) | DC12/24V ,12 points DC input 8 points relay output (without analog input) |
19 | AF-20MT-E(with LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent NPN) |
20 | AF-20MT-E(without LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent NPN) |
21 | AF-20MT-D(with LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent NPN) |
22 | AF-20MT-D(without LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent NPN) |
23 | AF-20MT-GD(with LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent PNP) |
24 | AF-20MT-GD(without LCD) | DC12/24V,12points DC input 8 points transistor output(exuivalent PNP) |
25 | AF-C232 | Cable for FAB and PC Modem for programming |
26 | AF-C485 | Interface between 485bus and FAB for network monitor |
27 | AF-CMP | The cable connect to the telephone module port "TO PC' |
28 | AF-COPY | Copy module |
29 | AF-D232 | the cable connecting FAB and PC (frontispiece plug type) |
30 | AF-MUL-D | Voice module to realize voice function(DC POWER) |
31 | AF-DUSB | the interface between FAB and PC USB port (frontispiece plug type) |
32 | AF-LCD | Removable LCD clip in screen for easy programming |
33 | AF-M232 | Interface between FAB and MODEM for remote control and programming |
34 | AF-MUL | Voice module to realize voice function(AC POWER) |
35 | AF-P485 | Interface between 485bus and PC for network function |
36 | AF-S485 | Interface is the connector between RS232 and RS485 (DIN installation). |
37 | AF(SR)-USB | USB/RS232 convertor (DIN installation) |
38 | SP-05AL | Input: 110/220VAC Output: Voltage :5VDC Current :14A Din rail type |
39 | SP-05AS | Input: 110/220VAC Output: Voltage :5VDC Current :7A Din rail type |
40 | SP-12AL | Input: 110/220VAC Output: Voltage :12VDC Current :6A Din rail type |
41 | SP-12AS | Input: 110/220VAC Output: Voltage :12VDC Current :3A Din rail type |
42 | SP-24AL | Input: 110/220VAC Output: Voltage :24VDC Current :3A Din rail type |
43 | SP-24AS | Input: 110/220VAC Output: Voltage :24VDC Current :1.5A Din rail type |
44 | SR-12MRAC | 100-240VAC 8 Points AC input, 4 points relay output |
45 | SR-12MRDC | DC12/24V 8 points DC input (with 6 points analog ) , 4 points relay output |
46 | SR-12MTDC | DC12/24V 8 points DC input (with 6 points analog ) , 4 points transistor output(NPN) |
47 | SR-12MGDC | DC12/24V 8 points DC input (with 6 points analog ) , 4 points transistor output(PNP) |
48 | SR-20ERA | 100-240VAC 12 AC input, 8 points relay output, 20 points extended module |
49 | SR-20ERD | DC12/24V 12 points DC input , 8 points relay output, 20 points extended module |
50 | SR-20ETD | DC12/24V 12 points DC input , 8 points transistor output ,20 points extended module (NPN) |
51 | SR-20EGD | DC12/24V 12 points DC input , 8 points transistor output ,20 points extended module (PNP) |
52 | SR-22MRAC | 100-240VAC 14 Points AC input, 8points relay output |
53 | SR-22MRDC | DC12/24V 14 points DC input (with 8 points analog ) , 8 points relay output |
54 | SR-22MTDC | DC12/24V 14 points DC input (with 8 points analog ) , 8 points transistor output(NPN) |
55 | SR-22MGDC | DC12/24V 14 points DC input (with 8 points analog ) , 8 points transistor output(PNP) |
56 | SR-AUD | The recording microphone and the wires between the sound card and the SR-VPA/SR-VPD |
57 | SR-CP | Programmable cable can edit,analog, monitor from PC to Super Relay |
58 | SR-EANT | Long connecting antenna of SR-RCA and SR-RCD |
59 | SR-ECBA | AC type, to remotely connect the machine and the extended module |
60 | SR-ECBD | DC type, to remotely connect the machine and the extended module |
61 | SR-EHC | Connection set of SR-HMI, remotely connect SR machine and SR-HMI 1.5m cable |
62 | SR-HMI-B | monitor operator panel |
63 | SR-LED | simple LED panel |
64 | SR-RCA | 100-240VAC remote control receiver module |
65 | SR-RCD | DC12/24V remote control receiver module |
66 | SR-TC | DC3V remote control emitter |
67 | SR-USB | USB/RS232 convertor (DIN installation) |
68 | SR-DUSB | the interface between SR and PC USB port (frontispiece plug type) |
69 | SR-VPA | 100-240VAC phone voice module |
70 | SR-VPD | DC12/24V phone voice module |
71 | SR-WRT | Programming panel |
72 | SR-TP | for connecting SR PLC with text panel SH-300 |
73 | SR-MC | MODBUS module |
74 | SR-MCA | MODBUS module |
75 | SR-MCD | MODBUS module |
76 | SH-300 | 4.3"STN - LCD Display screen DC12/24VA |
77 | AR1520 | convert RS-232 signals into isolated RS-422 or RS-485 |
78 | AR1520U | Convert USB to RS-232/422/485 terminal |
79 | AR1521 | convert RS-232 signals into isolated RS-422 or RS-485 |
80 | AR1521U | Convert USB to RS-232/422/485 terminal |
81 | C2400 | Timer,counter,frequency meter,tachometer |
82 | software | PLC software CD |