 |
MT8071IP
YUMO
YM00000222
1
New iP Series
Wide input voltage range: 10.5~28VDC
Boasts excellent performance with better operation experience compared to its predecessor.
Weintek’s compact HMI Series-iP has upgraded in every aspect to satisfy a variety of applications.
Equipped with Cortex A8 600MHz CPU.
Seamlessly upgraded from EB8000 to EasyBuilderPro.
| Display | Display | 7” TFT LCD |
| Resolution | 800 x 480 | |
| Brightness (cd/m2) | 300 | |
| Contrast Ratio | 500:1 | |
| Backlight Type | LED | |
| Backlight Life Time | >30,000 hrs. | |
| Colors | 16M | |
| LCD Viewing Angle (T/B/L/R) | 70/50/70/70 | |
| Touch Panel | Type | 4-wire Resistive Type |
| Accuracy | Active Area Length(X)±2%, Width(Y)±2% | |
| Memory | Flash | 128 MB |
| RAM | 128 MB | |
| Processor | 32 bits RISC Cortex-A8 600MHz | |
| I/O Port | USB Host | USB 2.0 x 1 |
| USB Client | N/A | |
| Ethernet | 10/100 Base-T x 1 | |
| COM Port | COM1: RS-232 COM2: RS-485 2W/4W | |
| RS-485 Dual Isolation | N/A | |
| RTC | Built-in | |
| Power | Input Power | 10.5~28VDC |
| Power Isolation | Built-in | |
| Power Consumption | 1A@12VDC ; 500mA@24VDC | |
| Voltage Resistance | 500VAC (1 min.) | |
| Isolation Resistance | Exceed 50MΩ at 500VDC | |
| Vibration Endurance | 10 to 25Hz (X, Y, Z direction 2G 30 minutes) | |
| Specification | PCB Coating | N/A |
| Enclosure | Plastic | |
| Dimensions WxHxD | 200.4 x 146.5 x 34 mm | |
| Panel Cutout | 192 x 138 mm | |
| Weight | Approx. 0.52 kg | |
| Mount | Panel mount | |
| Environment | Protection Structure | NEMA4 / IP65 Compliant Front Panel |
| Storage Temperature | -20°~60°C (-4°~140°F) | |
| Operating Temperature | 0°~50°C (32°~122°F) | |
| Relative Humidity | 10% ~ 90% (non-condensing) | |
| Certificate | CE | CE marked |
| Software | EasyBuilder Pro |
| PIN# | COM1 [RS232] | COM2 [RS485] | |
| 4W | 2W | ||
| 1 | Rx- | Data- | |
| 2 | Rx+ | Data+ | |
| 3 | Tx- | ||
| 4 | Tx+ | ||
| 5 | GND | ||
| 6 | TxD | ||
| 7 | RTS | ||
| 8 | CTS | ||
| 9 | RxD | ||
| a | Power Connector | c | USB Host |
| b | COM1 RS232, COM2 RS485 2W/4W | d | Ethernet |
Substitute type:
Display: 7” 16:9 TFT LCD
Resolution: 1024×600
Enclosure Material: Engineering plastic
Cutout Dimensions: 190mm×136mm
Flexem FE7070WE touchscreen, featuring a 7" resistive touchscreen, gray plastic enclosure, high-definition high-brightness full-view display, 1024x600 resolution, 24-bit colors, high-performance CPU, high-capacity storage, and 1 Ethernet port, enhances the touch-and-control experience for users.
Q:How to order our product?
A: 1) Please tell us the model and quantity and other request you need.
2) We make the PI for you.
3) After you confirm the PI, we arrange the order for you after receiving your payment.
4) After the goods finished, we send the goods out to you and tell you the tracking number.
5) We will track your goods until you receive the goods.
Q: What's your warranty?
A: One year.
Q: What's your contact information?
A: Our address: Liushi town, Zhejiang province, China.
Q: What's your shipment method?
A: We ship by Express, by air, by sea, by train. Normally we checked and compare, then provide customer the most proper shipment method.
Q: What about MOQ?
A: First order MOQ=1pcs.
Q: If I want to release order, what's the payment method you accept?
A: We accept T/T, Paypal, Western union, L/C.
Q: If I want to release order, what's the process?
A: Thanks. You can send inquiry to us by alibaba, or send us by email, we will reply within 24hrs.
Thank you & Now pls send your kindly inquiry ! ^!^
New iP Series
Wide input voltage range: 10.5~28VDC
Boasts excellent performance with better operation experience compared to its predecessor.
Weintek’s compact HMI Series-iP has upgraded in every aspect to satisfy a variety of applications.
Equipped with Cortex A8 600MHz CPU.
Seamlessly upgraded from EB8000 to EasyBuilderPro.
| Display | Display | 7” TFT LCD |
| Resolution | 800 x 480 | |
| Brightness (cd/m2) | 300 | |
| Contrast Ratio | 500:1 | |
| Backlight Type | LED | |
| Backlight Life Time | >30,000 hrs. | |
| Colors | 16M | |
| LCD Viewing Angle (T/B/L/R) | 70/50/70/70 | |
| Touch Panel | Type | 4-wire Resistive Type |
| Accuracy | Active Area Length(X)±2%, Width(Y)±2% | |
| Memory | Flash | 128 MB |
| RAM | 128 MB | |
| Processor | 32 bits RISC Cortex-A8 600MHz | |
| I/O Port | USB Host | USB 2.0 x 1 |
| USB Client | N/A | |
| Ethernet | 10/100 Base-T x 1 | |
| COM Port | COM1: RS-232 COM2: RS-485 2W/4W | |
| RS-485 Dual Isolation | N/A | |
| RTC | Built-in | |
| Power | Input Power | 10.5~28VDC |
| Power Isolation | Built-in | |
| Power Consumption | 1A@12VDC ; 500mA@24VDC | |
| Voltage Resistance | 500VAC (1 min.) | |
| Isolation Resistance | Exceed 50MΩ at 500VDC | |
| Vibration Endurance | 10 to 25Hz (X, Y, Z direction 2G 30 minutes) | |
| Specification | PCB Coating | N/A |
| Enclosure | Plastic | |
| Dimensions WxHxD | 200.4 x 146.5 x 34 mm | |
| Panel Cutout | 192 x 138 mm | |
| Weight | Approx. 0.52 kg | |
| Mount | Panel mount | |
| Environment | Protection Structure | NEMA4 / IP65 Compliant Front Panel |
| Storage Temperature | -20°~60°C (-4°~140°F) | |
| Operating Temperature | 0°~50°C (32°~122°F) | |
| Relative Humidity | 10% ~ 90% (non-condensing) | |
| Certificate | CE | CE marked |
| Software | EasyBuilder Pro |
| PIN# | COM1 [RS232] | COM2 [RS485] | |
| 4W | 2W | ||
| 1 | Rx- | Data- | |
| 2 | Rx+ | Data+ | |
| 3 | Tx- | ||
| 4 | Tx+ | ||
| 5 | GND | ||
| 6 | TxD | ||
| 7 | RTS | ||
| 8 | CTS | ||
| 9 | RxD | ||
| a | Power Connector | c | USB Host |
| b | COM1 RS232, COM2 RS485 2W/4W | d | Ethernet |
Substitute type:
Display: 7” 16:9 TFT LCD
Resolution: 1024×600
Enclosure Material: Engineering plastic
Cutout Dimensions: 190mm×136mm
Flexem FE7070WE touchscreen, featuring a 7" resistive touchscreen, gray plastic enclosure, high-definition high-brightness full-view display, 1024x600 resolution, 24-bit colors, high-performance CPU, high-capacity storage, and 1 Ethernet port, enhances the touch-and-control experience for users.
Q:How to order our product?
A: 1) Please tell us the model and quantity and other request you need.
2) We make the PI for you.
3) After you confirm the PI, we arrange the order for you after receiving your payment.
4) After the goods finished, we send the goods out to you and tell you the tracking number.
5) We will track your goods until you receive the goods.
Q: What's your warranty?
A: One year.
Q: What's your contact information?
A: Our address: Liushi town, Zhejiang province, China.
Q: What's your shipment method?
A: We ship by Express, by air, by sea, by train. Normally we checked and compare, then provide customer the most proper shipment method.
Q: What about MOQ?
A: First order MOQ=1pcs.
Q: If I want to release order, what's the payment method you accept?
A: We accept T/T, Paypal, Western union, L/C.
Q: If I want to release order, what's the process?
A: Thanks. You can send inquiry to us by alibaba, or send us by email, we will reply within 24hrs.
Thank you & Now pls send your kindly inquiry ! ^!^
