Proximity switches are the most common solution for non-contact detection. And the inductive type is the widely used proximity switches, which is through the electromagnetic waves to detect the metal abject near the sensor detection surface. In application, this is a very simple technology to detect 1”~2” metal object. YUMO Electric offer different series proximity sensor, that included inductive, photoelectrical, capacitive and etc. YUMO Electric continues to improve the performance and quality, enabling the sensors in a world-class level . If you are searching for proximity switch, YUMO will be your best choice.
LMF45 Inductive proximity switch | ||||
Detecting rang mm 0-50MM | YUMO part no. | |||
Non-flush | DC 6-36V | NPN | NO | LMF45-3050NA |
NC | LMF45-3050NB | |||
NO+NC | LMF45-3050NC | |||
PNP | NO | LMF45-3050PA | ||
NC | LMF45-3050PB | |||
NO+NC | LMF45-3050PC | |||
2 Wires | NO | LMF45-3050LA | ||
NC | LMF45-3050LB | |||
AC 90-250V | SCR | NO | LMF45-2050A | |
NC | LMF45-2050B | |||
| NO+NC | LMF45-2050C | ||
Relay output | LMF45-2050JC | |||
LMF45 Inductive proximity switch Characteristics | ||||
Output current | DC | 200mA | ||
SCR/relay | 500mA | |||
Output voltage drop | DC<3V , DC(Two wire system)<3.9V , AC<10V | |||
Consumption current | DC<15mA AC<10mA | |||
Standard detected object | 80×80×1(A3 Iron) | |||
Repeated precision | 0.05 | |||
Response Frequency | 200Hz/5Hz | |||
Working environment temperature | -25℃ ~+75℃ | |||
Insulation resistance | 50MΩ | |||
Shell material | Plastic | |||
Protection grade | IEC Standard IP67 | |||
Alternative model | |
content is empty!