Z3N series color mark sensor will emit light rays to scan the detected surface, and can identify the different color marks through receiving different intensity of light reflected back from different colors on the surface.
Coaxial optical design, more adaptable to surfaces of high-reflectance (such as Aluminum foil)
With light sources of blue, green, red, and various other colors for selection, more accurately to identify various colors.
Small light spot, excellent resolution.
Short response time of 0.1-1ms, can adapt to control demand of various packaging machines, bagging machines and printing machines.
Outstanding internal circuit design that can resist various electromagnetic and optical interference, has stability and no error action
With sensitivity adjustment knob, need no tool to adjust.
SICK color mark sensor KT6W-2P5116
FEATURES
Dimensions (W x H x D) | 30.4 mm x 53 mm x 80 mm |
Sensing distance | 10 mm |
Housing design (light emission) | Rectangular |
Sensing distance tolerance | ± 3 mm |
Light source | LED, RGB 1) |
Wave length | 640 nm, 525 nm, 470 nm |
Light emission | Short device side |
Light spot size | 1.5 mm x 6.5 mm |
Light spot direction | Vertical 2) |
Adjustment | Teach-in button |
Teach-in mode | Static 2-point teach-in |
1) Average service life: 100,000 h at TU = +25 °C.
2) In relation to long side of housing.
MECHANICS/ELECTRONICS
Supply voltage | 10 V DC ... 30 V DC 1) |
Ripple | ≤ 5 Vpp 2) |
Power consumption | < 40 mA 3) |
Switching frequency | 5 kHz 4) |
Response time | 100 µs |
Output type | PNP |
Switching output (voltage) | PNP: HIGH = VS- ≤ 2 V / LOW approx. 0 V |
Output current Imax. | 100 mA |
Retention time (ET) | 25 ms, non-volatile memory |
Connection type | Male connector M12, 4-pin |
Protection class | II 5) |
Circuit protection | UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression |
Enclosure rating | IP 67 |
Weight | 400 g |
Housing material | Zinc diecast |
1) Limit values when operated in short-circuit protected network: max. 8 A.
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) With light/dark ratio 1:1.
5) Reference voltage DC 32 V.
AMBIENT DATA
Ambient operating temperature | -10 °C ... +55 °C |
Ambient storage temperature | -25 °C ... +75 °C |
Shock load | According to IEC 60068 |
content is empty!