 |
AF-10MR-A2
YUMO
◆Feature
1.Password protection
2.Add power indicator
3.Improve analog accuracy
4.Improve RTC accuracy
5.Improve PLC running speed
6.2 channels with 485 interface and 1 channel with the programing interface
7.Support ARRAY Text Panel(SH300)
8.Support the standard Modbus RTU protocol
◆Technical Parameter
| Item | AF-10MR-A2 | AF-10MR-D2 | AF-10MR-E2 | AF-10MT-D2 | AF-10MT-GD2 | AF-10MT-E2 | ||||
| AF-20MR-A2 | AF-20MR-D2 | AF-20MR-E2 | AF-20MT-D2 | AF-20MT-GD2 | AF-20MT-E2 | |||||
| Surge Immunity | 2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5) | |||||||||
| Electrostatic Discharge (outer casing) | ±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5) | |||||||||
| Ambient Temperature | -10℃~+55℃ | |||||||||
| Storage Temperature | -40℃~+70℃ | |||||||||
| Ambient Humidity | 5%~95%RH | |||||||||
| Degree of Protection | IP20(Non-waterproof) | |||||||||
| Installation | Fixing with M3 screws or Standard DIN rail mounting | |||||||||
| Dimensions (mm) | 71.6*90.4*51.3(10 points);126.4*90.4*51.3(20 points) | |||||||||
| Programming Language | FBD | |||||||||
| Points | 10 points/20 points | |||||||||
| Memory Capacity | 127 FBDs | |||||||||
| Real-time Clock | 160h | |||||||||
| Password Protection | yes | |||||||||
| Analog Operation | At most 12 channels with DC 0-10V voltage | |||||||||
| Simulate Monitoring | Yes | |||||||||
| Communication Interface | support 2 channel with RS485 and 1 channel with program interfaces | |||||||||
| Baud Rate | 9600bps/19200bps | |||||||||
| Communication Protocol | Self-defined protocol/MODBUS RTU protocol | |||||||||
| Power Supply | ||||||||||
| Rated Voltage | AC100-240V | DC12-24V | AC/DC12-24V | DC12-24V | DC12-24V | DC12-24V | ||||
| Permissible Range | DC85-260V | DC10-28V | AC/DC10-28V | DC10-28V | DC10-28V | DC10-28V | ||||
| Power Consumption | <10w | <7w | <7w | <2w | <2w | <2w | ||||
| Digital Input | ||||||||||
| Input Type | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | ||||
| Input Signal 0 | AC0-40V | DC0-5V | AC/DC0-5V | DC0-5V | DC0-5V | DC0-5V | ||||
| Input Signal 1 | AC80-240V | DC10-24V | AC/DC10-24V | DC10-24V | DC10-24V | DC10-24V | ||||
| Isolation | Photoelectric isolation | -- | -- | -- | -- | -- | ||||
| Isolated Group | 6/12 groups | |||||||||
| Isolated Voltage | 2500/5000Vr.m.s | |||||||||
| Digital Output | ||||||||||
| Output Type | Relay | Relay | Relay | Transistor(NPN) | Transistor(PNP) | Transistor(NPN) | ||||
| Isolation Method | Relay isolation | Relay isolation | Relay isolation | - | - | - | ||||
| Analog Input | ||||||||||
| Input Type | -- | (DC0-10V)/6 inputs | -- | (DC0-10V)/6 inputs | (4-20mA)/2 inputs | -- | ||||
| (DC0-10V)/12 inputs | (DC0-10V)/12 inputs | (DC0-10V)/12 inputs | ||||||||
◆Type
| AF-10MR-A2 | AC100V-240V | 6 points digital input | 4 points relay output |
| AF-10MR-D2 | DC12V-24V | 6 points digital input (can be used as analog inputs) | 4 points relay output |
| AF-10MR-E2 | AC/DC12V-24V | 6 points digital input | 4 points relay output |
| AF-10MT-D2 | DC12V-24V | 6 points digital input (can be used as analog inputs) | 4 points NPN transistor output |
| AF-10MT-GD2 | DC12V-24V | 6 points digital input (can be used as analog inputs) | 4 points PNP transistor output |
| AF-10MT-E2 | DC12V-24V | 6 points digital input | 4 points NPN transistor output |
| AF-20MR-A2 | AC100V-240V | 12 points digital input | 8 points relay output |
| AF-20MR-D2 | DC12V-24V | 12 points digital input (can be used as analog inputs) | 8 points relay output |
| AF-20MR-E2 | AC/DC12V-24V | 12 points digital input | 8 points relay output |
| AF-20MT-D2 | DC12V-24V | 12 points digital input (can be used as analog inputs) | 8 points NPN transistor output |
| AF-20MT-GD2 | DC12V-24V | 12 points digital input (can be used as analog inputs) | 8 points PNP transistor output |
| AF-20MT-E2 | DC12V-24V | 12 points digital input | 8 points NPN transistor output |
◆Auxiliary Module
| AF-2322 | the cable is used to read/write the program by PC 232 port |
| AF-DUSB2 | the cable is used to read/write the program by PC USB port |
| AF-HMI | The removable LCD panel |
◆Dimension
| Take the 10 points module as an example. The 20 points modules share the same width and height, the only one difference exists in the length. |
| Type | Dimensions(mm) |
| 10 points main module | 71.6*90.4*51.3 |
| 20 points main module | 126.4*90.4*51.3 |
◆Feature
1.Password protection
2.Add power indicator
3.Improve analog accuracy
4.Improve RTC accuracy
5.Improve PLC running speed
6.2 channels with 485 interface and 1 channel with the programing interface
7.Support ARRAY Text Panel(SH300)
8.Support the standard Modbus RTU protocol
◆Technical Parameter
| Item | AF-10MR-A2 | AF-10MR-D2 | AF-10MR-E2 | AF-10MT-D2 | AF-10MT-GD2 | AF-10MT-E2 | ||||
| AF-20MR-A2 | AF-20MR-D2 | AF-20MR-E2 | AF-20MT-D2 | AF-20MT-GD2 | AF-20MT-E2 | |||||
| Surge Immunity | 2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5) | |||||||||
| Electrostatic Discharge (outer casing) | ±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5) | |||||||||
| Ambient Temperature | -10℃~+55℃ | |||||||||
| Storage Temperature | -40℃~+70℃ | |||||||||
| Ambient Humidity | 5%~95%RH | |||||||||
| Degree of Protection | IP20(Non-waterproof) | |||||||||
| Installation | Fixing with M3 screws or Standard DIN rail mounting | |||||||||
| Dimensions (mm) | 71.6*90.4*51.3(10 points);126.4*90.4*51.3(20 points) | |||||||||
| Programming Language | FBD | |||||||||
| Points | 10 points/20 points | |||||||||
| Memory Capacity | 127 FBDs | |||||||||
| Real-time Clock | 160h | |||||||||
| Password Protection | yes | |||||||||
| Analog Operation | At most 12 channels with DC 0-10V voltage | |||||||||
| Simulate Monitoring | Yes | |||||||||
| Communication Interface | support 2 channel with RS485 and 1 channel with program interfaces | |||||||||
| Baud Rate | 9600bps/19200bps | |||||||||
| Communication Protocol | Self-defined protocol/MODBUS RTU protocol | |||||||||
| Power Supply | ||||||||||
| Rated Voltage | AC100-240V | DC12-24V | AC/DC12-24V | DC12-24V | DC12-24V | DC12-24V | ||||
| Permissible Range | DC85-260V | DC10-28V | AC/DC10-28V | DC10-28V | DC10-28V | DC10-28V | ||||
| Power Consumption | <10w | <7w | <7w | <2w | <2w | <2w | ||||
| Digital Input | ||||||||||
| Input Type | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | NPN/PNP | ||||
| Input Signal 0 | AC0-40V | DC0-5V | AC/DC0-5V | DC0-5V | DC0-5V | DC0-5V | ||||
| Input Signal 1 | AC80-240V | DC10-24V | AC/DC10-24V | DC10-24V | DC10-24V | DC10-24V | ||||
| Isolation | Photoelectric isolation | -- | -- | -- | -- | -- | ||||
| Isolated Group | 6/12 groups | |||||||||
| Isolated Voltage | 2500/5000Vr.m.s | |||||||||
| Digital Output | ||||||||||
| Output Type | Relay | Relay | Relay | Transistor(NPN) | Transistor(PNP) | Transistor(NPN) | ||||
| Isolation Method | Relay isolation | Relay isolation | Relay isolation | - | - | - | ||||
| Analog Input | ||||||||||
| Input Type | -- | (DC0-10V)/6 inputs | -- | (DC0-10V)/6 inputs | (4-20mA)/2 inputs | -- | ||||
| (DC0-10V)/12 inputs | (DC0-10V)/12 inputs | (DC0-10V)/12 inputs | ||||||||
◆Type
| AF-10MR-A2 | AC100V-240V | 6 points digital input | 4 points relay output |
| AF-10MR-D2 | DC12V-24V | 6 points digital input (can be used as analog inputs) | 4 points relay output |
| AF-10MR-E2 | AC/DC12V-24V | 6 points digital input | 4 points relay output |
| AF-10MT-D2 | DC12V-24V | 6 points digital input (can be used as analog inputs) | 4 points NPN transistor output |
| AF-10MT-GD2 | DC12V-24V | 6 points digital input (can be used as analog inputs) | 4 points PNP transistor output |
| AF-10MT-E2 | DC12V-24V | 6 points digital input | 4 points NPN transistor output |
| AF-20MR-A2 | AC100V-240V | 12 points digital input | 8 points relay output |
| AF-20MR-D2 | DC12V-24V | 12 points digital input (can be used as analog inputs) | 8 points relay output |
| AF-20MR-E2 | AC/DC12V-24V | 12 points digital input | 8 points relay output |
| AF-20MT-D2 | DC12V-24V | 12 points digital input (can be used as analog inputs) | 8 points NPN transistor output |
| AF-20MT-GD2 | DC12V-24V | 12 points digital input (can be used as analog inputs) | 8 points PNP transistor output |
| AF-20MT-E2 | DC12V-24V | 12 points digital input | 8 points NPN transistor output |
◆Auxiliary Module
| AF-2322 | the cable is used to read/write the program by PC 232 port |
| AF-DUSB2 | the cable is used to read/write the program by PC USB port |
| AF-HMI | The removable LCD panel |
◆Dimension
| Take the 10 points module as an example. The 20 points modules share the same width and height, the only one difference exists in the length. |
| Type | Dimensions(mm) |
| 10 points main module | 71.6*90.4*51.3 |
| 20 points main module | 126.4*90.4*51.3 |
