You are here: Home » PLC » FAB PLC » AF-20MT-GD2 PNP transistor output Programmable Logic Controller PLC
Share to:

AF-20MT-GD2 PNP transistor output Programmable Logic Controller PLC

AF-20MT-GD2 DC12/24V 12 points DC Digital input 8 points transistor output (exuivalent PNP) plc controller programmable logic controller PLC

Features:
1.Password protection
2.Add power indicator
3.Improve analog accuracy
4.Improve RTC accuracy
5.Improve PLC running speed
6.2 channels with 485 interface and 1 channel with the programing interface
7.Support Text Panel (SH300)
8.Support the standard Modbus RTU protocol (only read)

  • AF-20MT-GD2
  • YUMO
  • YM00000020

AF-20MT-GD2 PNP transistor output Programmable Logic Controller PLC

Introduction:
         FAB2 Intelligent Controller Series is a new programmable controller launched by YUMO, with the programming by FBD (Function Block Diagram) , which is simpler and easier to learn than the conventional PLC (ladder diagram and instruction). In the design concept of YUMO FAB2 series products, traditional separated controller of PLC is combined with the writer on which the program can be written directly by using the function keys on the LCD front panel in order to reduce the cost and bring convenience to users. YUMO FAB2 is very compact and light-weighted, especially suitable for internal installation usage.
         In addition, FAB2 intelligent controller series can perform the local and remote Internet communication and monitoring. And FAB2 can be used with voice module to perform telephone remote control, voice prompting, auto-dialing and other functions. At present, the YUMO FAB2 is widely used in various areas such as industry, agriculture and automatic house control. It can be used almost everywhere.
 
Features:
1.Password protection
2.Add power indicator
3.Improve analog accuracy
4.Improve RTC accuracy
5.Improve PLC running speed
6.2 channels with 485 interface and 1 channel with the programing interface
7.Support Text Panel (SH300)
8.Support the standard Modbus RTU protocol (only read)
 

Model NO.: AF-20MT-GD2

       This model is a DC power supply, rated voltage can be DC12/24V, 12 points DC digital input (can be used as analog input), 8 points transistor output (exuivalent PNP), without LCD.

  • Exquisite and compact design

  • Multi-functional, easy operating, convenient, easy learning

 

Dimensions: (unit:mm)

Take the 10 points module as an example. The 20 points modules share the same width and height, the only one difference exists in the length.

dimension.jpg

1557284569(1).png

 

 

Item

AF-10MR-A2

AF-10MR-D2

AF-10MR-E2

AF-10MT-D2

AF-10MT-GD2

AF-10MT-E2

AF-20MR-A2

AF-20MR-D2

AF-20MR-E2

AF-20MT-D2

AF-20MT-GD2

AF-20MT-E2

Surge Immunity

2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5)

Electrostatic Discharge (outer casing)

±8kv(air discharge)/±6kv(contact discharge), Level 3 (IEC61000-4-5)

Ambient Temperature

-10℃~+55℃

Storage Temperature

-40℃~+70℃

Ambient Humidity

5%~95%RH

Degree of Protection

IP20(Non-waterproof)

Installation

Fixing with M3 screws or Standard DIN rail mounting

Dimensions (mm)

71.6*90.4*51.3(10 points);126.4*90.4*51.3(20 points)

Programming Language

FBD

Points

10 points/20 points

Memory Capacity

127 FBDs

Real-time Clock

160h

Password Protection

yes

Analog Operation

At most 12 channels with DC 0-10V voltage

Simulate Monitoring

Yes

Communication Interface

support 2 channel with RS485 and 1 channel with program interfaces

Baud Rate

9600bps/19200bps

Communication Protocol

Self-defined protocol/MODBUS RTU protocol

  Power Supply

Rated Voltage

AC100-240V

DC12-24V

AC/DC12-24V

DC12-24V

DC12-24V

DC12-24V

Permissible Range

DC85-260V

DC10-28V

AC/DC10-28V

DC10-28V

DC10-28V

DC10-28V

Power Consumption

<10w

<7w

<7w

<2w

<2w

<2w

   Digital Input

Input Type

NPN/PNP

NPN/PNP

NPN/PNP

NPN/PNP

NPN/PNP

NPN/PNP

Input Signal 0

AC0-40V

DC0-5V

AC/DC0-5V

DC0-5V

DC0-5V

DC0-5V

Input Signal 1

AC80-240V

DC10-24V

AC/DC10-24V

DC10-24V

DC10-24V

DC10-24V

Isolation

Photoelectric isolation

/

/

/

/

/

Isolated Group

6/12 groups

Isolated Voltage

2500/5000Vr.m.s

  Digital Output

Output Type

Relay

Relay

Relay

Transistor(NPN)

Transistor(PNP)

Transistor(NPN)

Isolation Method

Relay isolation

Relay isolation

Relay isolation

-

-

-

   Analog Input

Input Type

--

(DC0-10V)/6 inputs

--

(DC0-10V)/6 inputs

(4-20mA)/2 inputs

--

(DC0-10V)/12 inputs

(DC0-10V)/12 inputs

(DC0-10V)/12 inputs

 

 Product Pictures

YUMO-AF-20MT-GD2(1) YUMO-AF-20MT-GD2(2) YUMO-AF-20MT-GD2(3) YUMO-AF-20MT-GD2(4) YUMO-AF-20MT-GD2(5) YUMO-AF-20MT-GD2(6)
If you have any enquiry about quotation or cooperation,please feel free to email us at sale@yingselectric.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Product Inquire
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search

Contact Us

Tel:  0086-577-62791815
Fax: 0086-577-62791825
Skype: benjaminying
E-mail:sale@yingselectric.com
Add: NO.126 LIUYANG ROAD, ZHAOYANG INDUSTY ZONE, LIUSHI TOWN, YUEQING CITY, ZHEJIANG, 325604 CHINA

Quick navigation

Contact Us

Product categories

Contact us

  0086-577-62791815

 0086-577-62791825

  benjaminying


  sale@yingselectric.com

 
Copyright © 2016YUEQING YUMO ELECTRIC CO.,LTD All rights reserved.  Sitemap  Xml                                                                                                                       Designed by tqsh.net